Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. - Covers corrosion damage assessment and management in aircraft structures - Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) - Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services

This book provides a state-of-the-art review of the fail-safe and damage tolerance approaches, allowing weight savings and increasing aircraft reliability and structural integrity. The application of the damage tolerance approach requires extensive know-how of the fatigue and fracture properties, corrosion strength, potential failure modes and non-destructive inspection techniques, particularly minimum detectable defect and inspection intervals. In parallel, engineering practice involving damage tolerance requires numerical techniques for stress analysis of cracked structures. These evolved from basic mode I evaluations using rough finite element approaches, to current 3D modeling based on energetic approaches as the VCCT, or simulation of joining processes. This book provides a concise introduction to this subject.

Aircraft Fatigue: Design, Operational and Economic Aspects contains the proceedings of the ""Symposium on Aircraft Fatigue—Design, Operational and Economic Aspects,"" held in Melbourne, Australia, on May 22-24, 1967. The papers explore the design and operational aspects of the fatigue problem in general aviation and transport aircraft, as well as the economic aspects of the fatigue problem as it affects both operators and manufacturers. This book is comprised of 21 chapters and begins with a description of an approach to structural reliability analysis based on order statistics and the expected time to first failure in a fleet of specified magnitude, along with its application to structures subject to progressive fatigue damage. The following chapters deal with structural load measurement and analysis; design and certification programs for a wide range of aircraft types including the Anglo-French and American civil supersonic transports; acoustic fatigue; and the design of joints. The detection of fatigue cracks in service and the effects of fatigue on the cost of design and operation of aircraft are also discussed. This monograph will be a useful resource for aircraft and aeronautical engineers as well as officials of civil aviation.

Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

This comprehensive volume presents a wide spectrum of information about the design, analysis and manufacturing of aerospace structures and materials. Readers will find an interesting compilation of reviews covering several topics such as structural dynamics and impact simulation, acoustic and vibration testing and analysis, fatigue analysis and life optimization, reversing design methodology, non-destructive evaluation, remotely piloted helicopters, surface enhancement of aerospace alloys, manufacturing of metal matrix composites, applications of carbon nanotubes in aircraft material design, carbon fiber reinforcements, variable stiffness composites, aircraft material selection, and much more. This volume is a key reference for graduates undertaking advanced courses in materials science and aeronautical engineering as well as researchers and professional engineers seeking to increase their understanding of aircraft material selection and design.