This book discusses the main issues of fabrication and design, and applications of micromachined resonant devices, including techniques commonly used for processing the output signal of resonant micro-electro-mechanical systems (MEMS). Concepts of resonance are introduced, with an overview of fabrication techniques for micromachined devices – important to understand as design options will depend on how the device will be fabricated. Also explained: excitation and signal detection methods; an analytic model of device behavior (a valuable design tool); numerical simulation techniques; issues of damping and noise for resonant MEMS; electronic interfacing; packaging issues; and numerous examples of resonant MEMS from academia and industry. - Offers numerous academic and industrial examples of resonant MEMS - Provides an analytic model of device behaviour - Explains two-port systems in detail - Devotes ample space to excitation and signal detection methods - Covers issues of damping and noise for resonant MEMS, two topics of particular importance for high-Q devices

This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.

As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate biomedical engineering and military applications. Edited by Kris Iniewski, a revolutionary in the field of advanced semiconductor materials, Integrated Microsystems: Electronics, Photonics, and Biotechnology focuses on techniques for optimized design and fabrication of these intelligent miniaturized devices and systems. Composed of contributions from experts in academia and industry around the world, this reference covers processes compatible with CMOS integrated circuits, which combine computation, communications, sensing, and actuation capabilities. Light on math and physics, with a greater emphasis on microsystem design and configuration and electrical engineering, this book is organized in three sections—Microelectronics and Biosystems, Photonics and Imaging, and Biotechnology and MEMs. It addresses key topics, including physical and chemical sensing, imaging, smart actuation, and data fusion and management. Using tables, figures, and equations to help illustrate concepts, contributors examine and explain the potential of emerging applications for areas including biology, nanotechnology, micro-electromechanical systems (MEMS), microfluidics, and photonics.

A wide range of applications in chemistry and biochemistry are driving the rapid development of microfluidics. This book focuses its attention on an important subtopic of microfluidics; mixing in microscale. It provides the fundamentals of transport effects in microscale including molecular diffusion, convection, and chaotic advection.The science and technology of microfluidics cover a wide spectrum and the science of mixing in microscale has evolved from reports on fabricated devices to an extensive collection of established knowledge. The focal point of Micromixers: Fundamentals, Design, and Fabrication is the current applicable knowledge and practical issues in designing, fabricating, and characterizing micromixers in the chemical and biochemical industries. Based on scaling law, it recommends practical micromixer designs utilizing the advantages of the microscale effects. The book is intended for practicing engineers and for upper-level undergraduate and graduate level students. - Provides the basic terminology and fundamental physics of transport effects used for designing micromixers - Highlights the challenges and advantages of miniaturization in mixing - Outlines currently available microtechnologies for fabricating micromixers - Discusses current applications including lab-on-a-chip for chemical/biochemical analysis, and chemical production - Defines concepts such as electrohydrodynamic, dielectrophoretic, electrokinetic, magneto hydrodynamic, acoustic and thermal effects and their implementation in micromixers

Microfabricated resonators play an essential role in a variety of applications, including mass sensing, timing reference applications, and filtering applications. Many transduction mechanisms including piezoelectric, piezoresistive, and capacitive mechanisms, have been studied to induce and detect the motion of resonators. This book is meant to introduce and suggest several technological approaches together with design considerations for performance enhancement of capacitive silicon resonators, and will be useful for those working in field of micro and nanotechnology. Features Introduces and suggests several technological approaches together with design considerations for performance enhancement of capacitive silicon resonators Provides information on the various fabrication technologies and design considerations that can be employed to improve the performance capacitive silicon resonator which is one of the promising options to replace the quartz crystal resonator. Discusses several technological approaches including hermetic packaging based on the LTCC substrate, deep reactive ion etching, neutral beam etching technology, and metal-assisted chemical etching, as well as design considerations for mechanically coupled, selective vibration of high-order mode, movable electrode structures, and piezoresistive heat engines were investigated to achieve small motional resistance, low insertion loss, and high quality factor. Focusses on a capacitive sensing method based on the measurement of the change in capacitance between a sensing electrode and the resonant body. Reviews recent progress in performance enhancement methods for capacitive silicon resonator, which are mainly based on the works of the authors.

This book provides an introductory overview of the research done in recent years in the area of magnetic sensors. The topics presented in this book range from fundamental theories and properties of magnets and their sensing applications in areas such as biomedicine, microelectromechanical systems, nano-satellites and pedestrian tracking. Written for the readers who wished to obtain a basic understanding of the research area as well as to explore other potential areas of applications for magnetic sensors, this book presents exciting developments in the field in a highly readable manner.

This book reviews advances in cutting-edge micro-/nano-electrometers, and discusses the technological challenges involved in their practical implementation. The detection of electrostatic charge has a wide range of applications in ionization chambers, bio-analyte and aerosol particle instruments, mass spectrometers, scanning tunneling microscopes, and even quantum computers. Designing micro-/nano-electrometers (also known as charge sensors) for electrometry is considered vital because of the charge sensitivity and resolution issues at micro-/nano-scales. The remarkably dynamic microelectromechanical systems (MEMSs)/nanoelectromechanical systems (NEMSs), and advances in solid-state electronics, hold considerable potential for the design and fabrication of extremely sensitive charge sensors.