Examples for the Design of Structural Concrete with Strut-and-tie Models
Title | Examples for the Design of Structural Concrete with Strut-and-tie Models PDF eBook |
Author | American Concrete Institute. Convention |
Publisher | |
Pages | 264 |
Release | 2002 |
Genre | Architecture |
ISBN |
"Prepared by members of ACI Subcommittee 445-1, Strut and Tie Models, for sessions at the Fall Convention in Phoenix, October 27 to November 1, 2002, and sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion and ACI Committee 318-E, Shear and Torsion."
Structural Concrete
Title | Structural Concrete PDF eBook |
Author | Salah El-Metwally |
Publisher | CRC Press |
Pages | 261 |
Release | 2017-10-02 |
Genre | Technology & Engineering |
ISBN | 1351651552 |
This book examines the application of strut-and-tie models (STM) for the design of structural concrete. It presents state-of-the-art information, from fundamental theories to practical engineering applications, and also provides innovative solutions for many design problems that are not otherwise achievable using the traditional methods.
Design Examples for Strut-and-tie Models
Title | Design Examples for Strut-and-tie Models PDF eBook |
Author | fib Fédération internationale du béton |
Publisher | fib Fédération internationale du béton |
Pages | 225 |
Release | 2011 |
Genre | Technology & Engineering |
ISBN | 2883941017 |
fib Bulletin 61 is a continuation of fib Bulletin 16 (2002). Again the bulletin’s main objective is to demonstrate the application of the FIP Recommendations “Practical Design of Structural Concrete”, and especially to illustrate the use of strut-and-tie models to design discontinuity regions (D-regions) in concrete structures. Bulletin 61 presents 14 examples, most of which are existing structures built in recent years. Although some of the presented structures can be considered to be quite important and, in some instances, complex, the chosen examples are not intended to be exceptional. The main aim is to look at specific design aspects, by selecting D-regions of the presented structures that are designed and detailed according to the proposed design principles and specifications for the use of strut-and-tie models. Two papers at the end of the bulletin deal with the role of concrete tension fields in modelling with strut-and-tie models, and summarize the experiences gained by the Working Group in applying strut-and-tie models to the examples in the bulletin. It is hoped that fib Bulletin 61 will be of interest to engineers involved in the design of concrete structures, supporting the use of more consistent design and detailing tools such as strut-and-tie models.
Further Examples for the Design of Structural Concrete with Strut-and-tie Models
Title | Further Examples for the Design of Structural Concrete with Strut-and-tie Models PDF eBook |
Author | Karl-Heinz Reineck |
Publisher | |
Pages | 278 |
Release | 2010 |
Genre | Concrete beams |
ISBN | 9780870313929 |
Structural Concrete
Title | Structural Concrete PDF eBook |
Author | Salah El-Din E. El-Metwally |
Publisher | CRC Press, Taylor & Francis Group, CRC Press is |
Pages | 0 |
Release | 2018 |
Genre | Technology & Engineering |
ISBN | 9781498783842 |
"6.4.3 Example on Design of a Deep Beam with Eccentric Large Openings
Design Examples - Design Examples for the 1996 FIP Recommendations 'Practical Design of Structural Concrete''
Title | Design Examples - Design Examples for the 1996 FIP Recommendations 'Practical Design of Structural Concrete'' PDF eBook |
Author | fib Fédération internationale du béton |
Publisher | fib Fédération internationale du béton |
Pages | 206 |
Release | 2002-01-01 |
Genre | Technology & Engineering |
ISBN | 9782883940567 |
The 1996 FIP Recommendations Practical Design of Structural Concretewere finally published by SETO in September 1999. They had been developed based on the 1990 CEB-FIP Model Code. The main objective of this Bulletin is now to demonstrate by practical examples the application of these recommendations, and especially to illustrate the use of strut-and-tie models for designing discontinuity regions in concrete structures. These examples represent also a continuation of the 1990 FIP Handbook on Practical Design that had been based on the former (1984) version of the recommendations. Most of the examples are recently built existing structures. Although some of them may be considered as quite important, the chosen examples are by no means exceptional. The technical report does not deal with the discussion of aesthetic or general conceptual aspects. On the contrary, the main aim is to treat particular design aspects by selecting local regions of the chosen structures, that are then designed and detailed following the design principles and specifications proposed in the 1996 FIP Recommendations mentioned above. The document is believed to be of interest to all engaged in the design of structural concrete. It hopefully supports the use of more consistent design and detailing tools like strut-and-tie models.
Strut-and-tie Models for the Design of Structural Concrete
Title | Strut-and-tie Models for the Design of Structural Concrete PDF eBook |
Author | Kurt Schafer |
Publisher | |
Pages | |
Release | 1996 |
Genre | Concrete beams |
ISBN |