This study objective was to determine pavement friction characteristics throughout the service life of hot mix bituminous surfaces based on coarse aggregate source. Data from 1286 sections of Interstate and Primary Roadways was used in this analysis. Friction tests were performed between 1974 and 1979 using a two wheel friction tester substantially complying with the requirements of AASHTO T242.

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.

This synthesis report will be of interest to pavement design, construction, management, and research engineers, highway safety officials, and others concerned with pavement friction characteristics. It describes the current state of the practice and discusses the methods used for evaluating wet pavement friction characteristics of new and restored pavements. This synthesis reviews models used for measuring and evaluating friction and texture, causes for friction changes over time, and aggregate and mix design to provide adequate friction. Also presented are construction and surface restoration practices for providing good pavement surface characteristics. In addition, considerations of noise and ride quality are discussed when compromise may be required.

This report contains guidelines and recommendations for managing and designing for friction on highway pavements. The contents of this report will be of interest to highway materials, construction, pavement management, safety, design, and research engineers, as well as others concerned with the friction and related surface characteristics of highway pavements.

This synthesis will be of interest to construction, maintenance, pavement design, and materials engineers, pavement contractors, and others interested in the use of open-graded friction courses (OGFC) as an asphalt concrete pavement wearing surface. Information is provided on performance benefits and limitations of OGFC, material and mixture properties, and current construction practices in use in the United States and Europe. Advances in mixture design and construction techniques have overcome several of the performance limitations identified in early applications of OGFC, as well as enhanced the performance benefits associated with OGFC use. This report of the Transportation Research Board describes the current state of the practice with respect to the use of OGFC. Experience with the design, construction, and performance of OGFC is summarized, based on a review of the literature, documentation of experience from applications in the U.S. and Europe, and site visits to several states.

Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.