The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.

This book provides a guide to movement and restraint in bridges for bridge engineers and will enable them to draw up design calculations and specifications for effective installation, and satisfactory service and durability of bearings and joints. It has been fully revised and updated in line with current codes and design practice, modern developme

TRB's National Cooperative Highway Research Program (NCHRP) Report 568: Riprap Design Criteria, Recommended Specifications, and Quality Control examines design guidelines; recommended material specifications and test methods; recommended construction specifications; and construction, inspection, and quality control guidelines for riprap for a range of applications, including revetment on streams and riverbanks, bridge piers and abutments, and bridge scour countermeasures such as guide banks and spurs.

Sponsored by the Water Resources Engineering (Hydraulics) Divsion of ASCE. This collection contains 75 papers and 321 abstracts presented at conferences sponsored by the Water Resources Engineering (Hydraulics) Division of ASCE from 1991 through 1998. The collection contains many new and expanded versions of the original papers and is designed to assist the practitioner with the concepts in evaluating stream instability and scour at bridges. Topics include: history of bridge scour research; bridge scour determination; stream stability and geomorphology; construction scour; instrumentation for measuring and monitoring; field measurement; computer and physical modeling of bridge scour; scour at culverts; and economic and risk analysis. One important paper contains 384 field measurements of local scour at piers made by the U.S. Geological Survey.