This book focuses on the applications of Equivalent-Small-Parameter Method (ESPM) in solving the steady-state periodic solutions, as well as stability analysis, of kinds of open-loop or closed-loop operated DC/DC converters, such as PWM, quasi-resonant and resonant ones. The analytical expressions of DC components and harmonics of state variables (inductor current and capacitor voltage) with DC/DC converters can be obtained by ESPM, which can be helpful to understand the nonlinear operating mechanism of switched-mode converters. It can also be useful for stability analysis and design for practical converters. Modeling and analysis on all kinds of DC/DC converters are introduced in detail in this book, along with a large amount of simulation or experimental waveforms to verify the correctness of the theoretical analysis based on ESPM.

The most critical part of the modern switching-mode power supply is the regulated dc/dc converter. Its dynamic behavior directly determines or influences four of the important characteristics of the power supply: • Stability of the feedback loop • Rejection of input-voltage ripple and the closely-related transient re sponse to input-voltage perturbation • Output impedance and the closely-related transient response to load perturbation • Compatibility with the input EMI filter Due to the complexity of the operation of the converter, predicting its dynamic behavior has not been easy. Without accurate prediction, and depending only on building the circuit and tinkering with it until the operation is satisfactory, the engineering cost can easily escalate and schedules can be missed. The situation is not much better when the circuit is built in the computer, using a general-purpose circuit-simulation program such as SPICE. (At the end of this book is a form for obtaining information on a computer program especially well suited for dynamic analysis of switching-mode power converters: DYANA, an acronym for "DYnamic ANAlysis. " DYANA is based on the method given in this book. ) The main goal of this book is to help the power-supply designer in the prediction of the dynamic behavior by providing user-friendly analytical tools, concrete results of already-made analyses, tabulated for easy application by the reader, and examples of how to apply the tools provided in the book.

AVERAGE CURRENT-MODE CONTROL OF DC-DC POWER CONVERTERS An authoritative one-stop guide to the analysis, design, development, and control of a variety of power converter systems Average Current-Mode Control of DC-DC Power Converters provides comprehensive and up-to-date information about average current-mode control (ACMC) of pulse-width modulated (PWM) dc-dc converters. This invaluable one-stop resource covers both fundamental and state-of-the-art techniques in average current-mode control of power electronic converters???featuring novel small-signal models of non-isolated and isolated converter topologies with joint and disjoint switching elements and coverage of frequency and time domain analysis of controlled circuits. The authors employ a systematic theoretical framework supported by step-by-step derivations, design procedures for measuring transfer functions, challenging end-of-chapter problems, easy-to-follow diagrams and illustrations, numerous examples for different power supply specifications, and practical tips for developing power-stage small-signal models using circuit-averaging techniques. The text addresses all essential aspects of modeling, design, analysis, and simulation of average current-mode control of power converter topologies, such as buck, boost, buck-boost, and flyback converters in operating continuous-conduction mode (CCM). Bridging the gap between fundamental modeling methods and their application in a variety of switched-mode power supplies, this book: Discusses the development of small-signal models and transfer functions related to the inner current and outer voltage loops Analyzes inner current loops with average current-mode control and describes their dynamic characteristics Presents dynamic properties of the poles and zeros, time-domain responses of the control circuits, and comparison of relevant modeling techniques Contains a detailed chapter on the analysis and design of control circuits in time-domain and frequency-domain Provides techniques required to produce professional MATLAB plots and schematics for circuit simulations, including example MATLAB codes for the complete design of PWM buck, boost, buck-boost, and flyback DC-DC converters Includes appendices with design equations for steady-state operation in CCM for power converters, parameters of commonly used power MOSFETs and diodes, SPICE models of selected MOSFETs and diodes, simulation tools including introductions to SPICE, MATLAB, and SABER, and MATLAB codes for transfer functions and transient responses Average Current-Mode Control of DC-DC Power Converters is a must-have reference and guide for researchers, advanced graduate students, and instructors in the area of power electronics, and for practicing engineers and scientists specializing in advanced circuit modeling methods for various converters at different operating conditions.

This book collates the information available on this topic, hitherto only to be found in journals and at conferences. It presents the fundamentals and advances in average and small-signal modeling of switched-mode converters, before applying this information to generate a real canonical converter model. Practical examples are scattered throughout the text, and experimental evidence is cited to support theoretical findings. The result is a solid basis for understanding and utilizing the dynamics of switched-mode converters -- for the first time in their 40-year history.

This book describes the operation and analysis of soft-commutated isolated DC–DC converters used in the design of high efficiency and high power density equipment. It explains the basic principles behind first- and second-order circuits with power switches to enable readers to understand the importance of these converters in high efficiency and high power density power supply design for residential, commercial, industrial and medical use as well as in aerospace equipment. With each chapter featuring a different power converter topology, the book covers the most important resonant converters, including series resonant converters; resonant LLC converters; soft commutation pulse width modulation converters; zero voltage switching; and zero current switching. Each topic is presented with full analysis, a showcase of the power stages of the converters, exercises and their solutions as well as simulation results, which mainly focus on the commutation analysis and output characteristic. This book is a valuable source of information for professionals working in power electronics, power conversion and design of high efficiency and high power density DC–DC converters and switch mode power supplies. The book also serves as a point of reference for engineers responsible for development projects and equipment in companies and research centers and a text for advanced students.

Modeling is the process of formulating a mathematical description of the system. A model, no matter how detailed, is never a completely accurate representation of a real physical system. A mathematical model is always just an approximation of the true, physical reality of the system dynamics. Uncertainty refers to the differences or errors between model and real systems and whatever methodology is used to present these errors will be called an uncertainty model. Successful robust control-system design would depend on, to a certain extent, an appropriate description of the perturbation considered. Modeling the uncertainties in the switch mode DC-DC converters is an important step in designing robust controllers. This book studies different techniques which can be used to extract the uncertain model of DC-DC converters. Once the uncertain model is extracted, robust control techniques such as ∞ and μ synthesis can be used to design the robust controller. The book composed of two case studies. The first one is a buck converter and the second one is a Zeta converter. MATLAB® programming is used extensively throughout the book. Some sections use PLECS® as well. This book is intended to be guide for both academicians and practicing engineers.

Numbers alone are enough to describe the importance of DC/DC converters in modern power engineering. There are more than 500 recognized topologies, with more added each year. In their groundbreaking book Advanced DC/DC Converters, expert researchers Luo and Ye organized these technologies into six generations and illustrated their principles and operation through examples of over 100 original topologies. In chapters carefully drawn from that work, Synchronous and Resonant DC/DC Conversion Technology, Energy Factor, and Mathematical Modeling provides a focused, concise overview of synchronous and multiple-element resonant power converters. This reference carefully examines the topologies of more than 50 synchronous and resonant converters by illustrating the design of several prototypes developed by the authors. Using more than 100 diagrams as illustration, the book supplies insight into the fundamental concepts, design, and applications of the fifth (synchronous) and sixth (multiple-element resonant) converters as well as DC power sources and control circuits. The authors also discuss EMI/EMC problems and include a new chapter that introduces the new concept of Energy Factor (EF) and its importance in mathematical modeling as well as analyzing the transient process and impulse response of DC/DC converters. Synchronous and Resonant DC/DC Conversion Technology, Energy Factor, and Mathematical Modeling supplies a quick and accessible guide for anyone in need of specialized information on synchronous and resonant DC/DC converter technologies.