Technical Order (TO) 1-1A-1 is one of a series of manuals prepared to assist personnel engaged in the general maintenance and repair of military aircraft. This manual covers general aircraft structural repair. This is a Joint-Service manual and some information may be directed at one branch of the service and not the other. Wherever the text of the manual refers to Air Force technical orders for supportive information, refer to the comparable Navy documents (see Table 1). The satisfactory performance of aircraft requires continuous attention to maintenance and repair to maintain aircraft structural integrity. Improper maintenance and repair techniques can pose an immediate and potential danger. The reliability of aircraft depends on the quality of the design, as well as the workmanship used in making the repairs. It is important that maintenance and repair operations be made according to the best available techniques to eliminate, or at least minimize, possible failures.

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.Get up-to-date information on every aspect of aircraft maintenance and prepare for the FAA A&P certification examThis trusted textbook covers all of the airframe maintenance and repair topics that students must understand in order to achieve Airframe and Powerplant (A&P) certification as set forth by the FAA’s FAR 147 curriculum. Fully updated for the latest standards and technologies, the book offers detailed discussions of key topics, including structures and coverings, sheet metal and welding, assemblies, landing gear, and fuel systems. Relevant FAA regulations and safety requirements are highlighted throughout. You will get hundreds of illustrations, end-of-chapter review questions, and multiple-choice practice exam questions. New content reflects the industry-wide shift toward all-composite aircraft models and includes explanations of cutting-edge covering systems, modern welding techniques, methods and tools for riveting and rigging, fire detection, and de-icing systems.Aircraft Maintenance & Repair, Eighth Edition, covers:•Hazardous materials•Structures•Fabric•Painting•Welding equipment•Welding and repair•Sheet-metal construction, inspection, and repair•Plastics and composites•Assembly and rigging•Fluid power•Aircraft landing-gear and fuel systems•Environmental and auxiliary systems•Troubleshooting

Butterworth-Heinemann’s Aircraft Engineering Principles and Practice Series provides students, apprentices and practicing aerospace professionals with the definitive resources to advance their aircraft engineering maintenance studies and career. This book provides an introduction to the principles of communications and navigation systems. It is written for anyone pursuing a career in aircraft maintenance engineering or a related aerospace engineering discipline, and in particular will be suitable for those studying for licensed aircraft maintenance engineer status. The book systematically addresses the relevant sections (ATA chapters 23/34) of modules 11 and 13 of part-66 of the EASA syllabus. It is ideal for anyone studying as part of an EASA and FAR-147 approved course in aerospace engineering.

The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. - Covers corrosion damage assessment and management in aircraft structures - Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) - Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services

Aircraft Engineering Principles is the essential text for anyone studying for licensed A&P or Aircraft Maintenance Engineer status. The book is written to meet the requirements of JAR-66/ECAR-66, the Joint Aviation Requirement (to be replaced by European Civil Aviation Regulation) for all aircraft engineers within Europe, which is also being continuously harmonised with Federal Aviation Administration requirements in the USA. The book covers modules 1, 2, 3, 4 and 8 of JAR-66/ECAR-66 in full and to a depth appropriate for Aircraft Maintenance Certifying Technicians, and will also be a valuable reference for those taking ab initio programmes in JAR-147/ECAR-147 and FAR-147. In addition, the necessary mathematics, aerodynamics and electrical principles have been included to meet the requirements of introductory Aerospace Engineering courses. Numerous written and multiple choice questions are provided at the end of each chapter, to aid learning.