Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.

Electrical Engineering Engineering Electromagnetic Compatibility Principles, Measurements, Technologies, and Computer Models Second Edition This practical, enhanced second edition will teach you to avoid costly post-design electromagnetic compatibility (EMC) fixes. Once again, V. Prasad Kodali provides a comprehensive introduction to EMC and presents current technical information on sources of electromagnetic interference (EMI), EMC/EMI measurements, technologies to control EMI, computer simulation and design, and international EMC standards. Features added to this second edition include: * Two new chapters covering EMC computer modeling and simulation and signal integrity * Expanded assignments at the close of each chapter * Illustrative examples that enhance comprehension * Updated information in Selected Bibliography and EMC Standards chapters * A new appendix that lists websites relevant to EMC/EMI Engineering Electromagnetic Compatibility, Second Edition is presented in a concise, user-friendly format that combines a rigorous solutions-based, mathematical treatment of the underlying theories of EMC with the most recent practical applications. It is ideally suited as a desk reference for practicing engineers and as a textbook for students who need to understand the form and function of EMC and its relevance to a variety of systems.

Circuits are faster and more tightly packed than ever, wireless technologies increase the electromagnetic (EM) noise environment, new materials entail entirely new immunity issues, and new standards govern the field of electromagnetic compatibility (EMC). Maintaining the practical and comprehensive approach of its predecessor, Principles and Techniques of Electromagnetic Compatibility, Second Edition reflects these emerging challenges and new technologies introduced throughout the decade since the first edition appeared. What's new in the Second Edition? Characterization and testing for high-speed design of clock frequencies up to and above 6 GHz Updates to the regulatory framework governing EM compliance Additional coverage of the printed circuit board (PCB) environment as well as additional numerical tools An entirely new section devoted to new applications, including signal integrity, wireless and broadband technologies, EMC safety, and statistical EMC Added coverage of new materials such as nanomaterials, band gap devices, and composites Along with new and updated content, this edition also includes additional worked examples that demonstrate how estimates can guide the early stages of design. The focus remains on building a sound foundation on the fundamental concepts and linking this to practical applications, rather than supplying application-specific fixes that do not easily generalize to other areas.

A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies

There is currently no single book that covers the mathematics, circuits, and electromagnetics backgrounds needed for the study of electromagnetic compatibility (EMC). This book aims to redress the balance by focusing on EMC and providing the background in all three disciplines. This background is necessary for many EMC practitioners who have been out of study for some time and who are attempting to follow and confidently utilize more advanced EMC texts. The book is split into three parts: Part 1 is the refresher course in the underlying mathematics; Part 2 is the foundational chapters in electrical circuit theory; Part 3 is the heart of the book: electric and magnetic fields, waves, transmission lines and antennas. Each part of the book provides an independent area of study, yet each is the logical step to the next area, providing a comprehensive course through each topic. Practical EMC applications at the end of each chapter illustrate the applicability of the chapter topics. The Appendix reviews the fundamentals of EMC testing and measurements.

As the number of electrical devices in use continues to grow, so do the challenges of ensuring the electromagnetic compatibility (EMC) of products and systems. Fortunately, engineers have at their disposal an array of approximations, models, and rules-of-thumb to help them meet those challenges. Unfortunately, the number of these tools and guidelines is overwhelming, and worse still is the thought of investigating their origins and confirming their results. The Electromagnetic Compatibility Handbook is an unprecedented compilation of the many approximations, guidelines, models, and rules-of-thumb used in EMC analyses, complete with their sources and their limitations. The book presents these in an efficient question-and-answer format and incorporates an extremely comprehensive set of tables and figures. The author has either derived from basic principles or obtained and verified from their original sources all of the expressions in the tables. Mathcad was used to generate most of the plots and solve many of the equations, and the author includes the Mathcad programs for many of these so users can clearly see the variable assignments, assumptions, and equations. Designed to be of long-lasting value to engineers, researchers, and students, the Electromagnetic Compatibility Handbook is ideal both for quick reference and as a textbook for upper-level and graduate electrical engineering courses.