Handbook of Energy Efficiency in Buildings: A Life Cycle Approach offers a comprehensive and in-depth coverage of the subject with a further focus on the Life Cycle. The editors, renowned academics, invited a diverse group of researchers to develop original chapters for the book and managed to well integrate all contributions in a consistent volume. Sections cover the role of the building sector on energy consumption and greenhouse gas emissions, international technical standards, laws and regulations, building energy efficiency and zero energy consumption buildings, the life cycle assessment of buildings, from construction to decommissioning, and other timely topics. The multidisciplinary approach to the subject makes it valuable for researchers and industry based Civil, Construction, and Architectural Engineers. Researchers in related fields as built environment, energy and sustainability at an urban scale will also benefit from the books integrated perspective. Presents a complete and thorough coverage of energy efficiency in buildings Provides an integrated approach to all the different elements that impact energy efficiency Contains coverage of worldwide regulation

This book analyzes the trends and technologies of green and energy efficient building, identifying strategies for implementing energy savings and enabling the use of renewable resources in residential, commercial, healthcare and educational building sectors. The authors focus on best practices in temperate climates, providing in-depth coverage of urban heat island, climate change and fuel poverty mitigation through architectural optimization, leveraging renewable energy sources and utilization of cutting-edge cooling materials. Pragmatic emphasis is placed on improving the energy performance of existing building stock to meet short and long term objectives of climate and energy conservation strategies. Engineers, architects, designers, students, policy makers and efficiency professionals will all gain valuable insights and ideas from this practical handbook to greening the built environment.

Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed.

Optimal Design and Retrofit of Energy Efficient Buildings, Communities, and Urban Centers presents current techniques and technologies for energy efficiency in buildings. Cases introduce and demonstrate applications in both the design of new buildings and retrofit of existing structures. The book begins with an introduction that includes energy consumption statistics, building energy efficiency codes, and standards and labels from around the world. It then highlights the need for integrated and comprehensive energy analysis approaches. Subsequent sections present an overview of advanced energy efficiency technologies for buildings, including dynamic insulation materials, phase change materials, LED lighting and daylight controls, Life Cycle Analysis, and more. This book provides researchers and professionals with a coherent set of tools and techniques for enhancing energy efficiency in new and existing buildings. The case studies presented help practitioners implement the techniques and technologies in their own projects. Introduces a holistic analysis approach to energy efficiency for buildings using the concept of energy productivity Provides coverage of individual buildings, communities and urban centers Includes both the design of new buildings and retrofitting of existing structures to improve energy efficiency Describes state-of-the-art energy efficiency technologies Presents several cases studies and examples that illustrate the analysis techniques and impact of energy efficiency technologies and controls

Cost optimal and nearly zero energy performance levels are principles initiated by the European Union’s (EU) Energy Performance of Buildings Directive which was recast in 2010. These will be major drivers in the construction sector in the next few years, because all new buildings in the EU from 2021 onwards are expected to be nearly zero energy buildings (nZEB). This book introduces the technical definitions, system boundaries, energy calculation methodology and input data needed to set primary energy based minimum/cost optimal and nZEB requirements in national energy frames. Worked examples are provided to illustrate the calculation of delivered, exported and primary energy, and renewable energy contribution. Five case studies of high performance nZEB office buildings across Europe are reported to show alternative technical solutions and to draw some general design rules based on completed nZEB buildings. Specific features of the nZEB design process, especially in the early stages, and architectural competitions are included. These describe important design issues in the scoping and conceptual design phase, allowing design streams to be controlled so that specified targets can be met. This book is intended for readers who need to be aware of or are working with the energy performance of buildings – for decision makers in public and private sectors, architects, engineers, construction clients, consultants, contractors, manufacturers and students. The editor of this book, Professor Jarek Kurnitski has made major contributions to the preparation of the European REHVA nZEB technical definition and has developed energy calculation frames for current Estonian and Finnish energy performance regulations. He is the leader of nZEB research at Tallinn University of Technology in Estonia and Aalto University in Finland, and he has over 300 publications.

The role and influence of building services engineers is undergoing rapid change and is pivotal to achieving low-carbon buildings. However, textbooks in the field have largely focused on the detailed technicalities of HVAC systems, often with little wider context. This book addresses that need by embracing a contemporary understanding of energy efficiency imperatives, together with a strategic approach to the key design issues impacting upon carbon performance, in a concise manner. The key conceptual design issues for planning the principal systems that influence energy efficiency are examined in detail. In addition, the following issues are addressed in turn: Background issues for sustainability and the design process Developing a strategic approach to energy-efficient design How to undertake load assessments System comparison and selection Space planning for services Post-occupancy evaluation of completed building services In order to deliver sustainable buildings, a new perspective is needed amongst building and services engineering designers, from the outset of the conceptual design stage and throughout the whole design process. In this book, students and practitioners alike will find the ideal introduction to this new approach.

In The Power of Existing Buildings, academic sustainability expert Robert Sroufe, and construction and building experts Craig Stevenson and Beth Eckenrode, explain how to realize the potential of existing buildings and make them perform like new. This step-by-step guide will help readers to: understand where to start a project; develop financial models and realize costs savings; assemble an expert team; and align goals with numerous sustainability programs. The Power of Existing Buildings will challenge you to rethink spaces where people work and play, while determining how existing buildings can save the world. The insights and practical experience of Sroufe, Stevenson, and Eckenrode, along with the project case study examples, provide new insights on investing in existing buildings for building owners, engineers, occupants, architects, and real estate and construction professionals.