The 7th Edition (2020) update to the Florida Building Code: Energy Conservation is a fully integrated publication that updates the 6th Edition 2017 Florida Building Code: Energy Conservation using the latest changes to the 2018 International Energy Conservation Code® with customized amendments adopted statewide. Chapter tabs are also included. Effective Date: December 31, 2020

The 7th Edition (2020) update to the Florida Building Code: Residential is a fully integrated publication that updates the 6th Edition 2017 Florida Building Code: Residential using the latest changes to the 2018 International Residential Code® with customized amendments adopted statewide. Florida Building Code Administrative Chapter 1 is included. Chapter tabs are also included. Effective Date: December 31, 2020

Get one step closer to becoming a Florida Air A contractor with a prep course designed by 1 Exam Prep to help you conquer the required Florida Air A Contractors Trade Knowledge computer based examination. Use a blended, self-study and virtual class structure to tailor your prep to your individual learning style. Testing taking techniques and tips Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Florida Class A Air-Conditioning Contractor is a contractor whose services are unlimited in the execution of contracts requiring the experience, knowledge, and skill to install, maintain, repair, fabricate, alter, extend, or design, if not prohibited by law, central air-conditioning, refrigeration, heating, and ventilating systems, including duct work in connection with a complete system if such duct work is performed by the contractor as necessary to complete an air-distribution system, boiler, and unfired pressure vessel systems, and all appurtenances, apparatus, or equipment used in connection therewith, and any duct cleaning and equipment sanitizing that requires at least a partial disassembling of the system; to install, maintain, repair, fabricate, alter, extend, or design, if not prohibited by law, piping, insulation of pipes, vessels and ducts, pressure and process piping, and pneumatic control piping; to replace, disconnect, or reconnect power wiring on the load side of the dedicated existing electrical disconnect switch; to install, disconnect, and reconnect low voltage heating, ventilating, and air-conditioning control wiring; and to install a condensate drain from an air-conditioning unit to an existing safe waste or other approved disposal other than a direct connection to a sanitary system. The scope of work for such contractor also includes any excavation work incidental thereto, but does not include any work such as liquefied petroleum or natural gas fuel lines within buildings, except for disconnecting or reconnecting changeouts of liquefied petroleum or natural gas appliances within buildings; potable water lines or connections thereto; sanitary sewer lines; swimming pool piping and filters; or electrical power wiring. A Class A air-conditioning contractor may test and evaluate central air-conditioning, refrigeration, heating, and ventilating systems, including duct work; however, a mandatory licensing requirement is not established for the performance of these specific services.

Get one step closer to becoming a Florida Glass and Glazing contractor with a exam prep book designed by 1 Exam Prep to help you conquer the required 2023 Florida Glass and Glazing Contractor Trade Knowledge examination. Test taking techniques and tips Highlight and tab locations for the references books Practice questions Covered topics include information: A Glass and Glazing contractor falls under the category of a Specialty Contractor. The scope of work for this contractor is limited to the installation and attachment of all types of windows and glass, the installation of swinging or sliding glass doors to the existing walls, floors, columns, or other structural members of the building, the installation of glass holding or supporting mullions or horizontal bars which are attached to existing building walls, floors, columns, or other structural members of the building, and the cutting and installation of glass and mirrors. This license also allows installation of prefabricated glass, metal or plastic curtain walls and panels, caulking incidental to such work and assembly, and installation of shower and tub enclosures and metal fascias.