Emergency Operations Reliability Standards - Undervoltage Load Shedding Reliability Standards - Definition of Remedial Action Scheme (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Emergency Operations Reliability Standards - Undervoltage Load Shedding Reliability Standards - Definition of Remedial Action Scheme (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Commission approves Reliability Standards and definitions of terms submitted in three related petitions by the North American Electric Reliability Corporation (NERC), the Commission-approved Electric Reliability Organization. The Commission approves Reliability Standards EOP-011-1 (Emergency Operations) and PRC-010-1 (Undervoltage Load Shedding). The proposed Reliability Standards consolidate, streamline and clarify the existing requirements of certain currently-effective Emergency Preparedness and Operations (EOP) and Protection and Control (PRC) standards. The Commission also approves NERC's revised definition of the term Remedial Action Scheme as set forth in the NERC Glossary of Terms Used in Reliability Standards, and modifications of specified Reliability Standards to incorporate the revised definition. Further, the Commission approves the implementation plans, and the retirement of certain currently-effective Reliability Standards. This book contains: - The complete text of the Emergency Operations Reliability Standards - Undervoltage Load Shedding Reliability Standards - Definition of Remedial Action Scheme (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

System Restoration Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the System Restoration Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Commission approves three Emergency Operations and Preparedness (EOP) Reliability Standards, EOP-001-1 (Emergency Operations Planning), EOP-005-2 (System Restoration from Blackstart Resources), and EOP-006-2 (System Restoration Coordination) as well as the definition of the term "Blackstart Resource" submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC), the Electric Reliability Organization certified by the Commission. The approved Reliability Standards require transmission operators, generation operators, and certain transmission owners and distribution providers to ensure that plans, facilities and personnel are prepared to enable system restoration from Blackstart Resources and require reliability coordinators to establish plans and prepare personnel to enable effective coordination of the system restoration process. The Commission also approves the NERC's proposal to retire four existing EOP Reliability Standards and a definition that are replaced by the Standards and definition approved in this Final Rule. This book contains: - The complete text of the System Restoration Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

Automatic Underfrequency Load Shedding and Load Shedding Plans Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Automatic Underfrequency Load Shedding and Load Shedding Plans Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act (FPA), the Federal Energy Regulatory Commission (Commission) approves Reliability Standards PRC-006-1 (Automatic Underfrequency Load Shedding) and EOP-003-2 (Load Shedding Plans), developed and submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC), the Electric Reliability Organization certified by the Commission. In addition, pursuant to section 215(d)(5) of the FPA, the Commission directs NERC to develop a modification to clarify the intent of one provision of the Reliability Standard. The approved Reliability Standards establish design and documentation requirements for automatic underfrequency load shedding programs that arrest declining frequency and assist recovery of frequency following system events leading to frequency degradation. The Commission approves, with modifications, the related Violation Risk Factors and Violation Severity Levels, implementation plan, and effective date proposed by NERC. The Commission also approves the regional variance for the Western Electricity Coordinating Council in Reliability Standard PRC-006-1. This book contains: - The complete text of the Automatic Underfrequency Load Shedding and Load Shedding Plans Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act (FPA), the Federal Energy Regulatory Commission (Commission) approves a revised Reliability Standard, PRC-005-2-Protection System Maintenance, to supersede four existing Reliability Standards, PRC-005-1.1b (Transmission and Generation Protection System Maintenance and Testing), PRC-008-0 (Underfrequency Load Shedding Equipment Maintenance), PRC-011-0 (Undervoltage Load Shedding Equipment Maintenance) and PRC-017-0 (Special Protection System Maintenance and Testing). This book contains: - The complete text of the Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

Regional Reliability Standard PRC-006-NPCC-1 - Automatic Underfrequency Load Shedding (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Regional Reliability Standard PRC-006-NPCC-1 - Automatic Underfrequency Load Shedding (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act (FPA), the Federal Energy Regulatory Commission (Commission) approves regional Reliability Standard PRC-006-NPCC-1 (Automatic Underfrequency Load Shedding), submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC). Regional Reliability Standard PRC-006-NPCC-1 applies to generator owners, planning coordinators, distribution providers, and transmission owners in the Northeast Power Coordinating Council Region. Regional Reliability Standard PRC-006-NPCC-1 is designed to ensure the development of an effective automatic underfrequency load shedding (UFLS) program to preserve the security and integrity of the Bulk-Power System during declining system frequency events, in coordination with the NERC continent-wide UFLS Reliability Standard PRC-006-1. The Commission approves the related violation risk factors, violation severity levels, implementation plan, and effective dates proposed by NERC. This book contains: - The complete text of the Regional Reliability Standard PRC-006-NPCC-1 - Automatic Underfrequency Load Shedding (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Federal Energy Regulatory Commission (Commission) approves three new Interconnection Reliability Operations and Coordination Reliability Standards and seven revised Reliability Standards related to Emergency Preparedness and Operations, Interconnection Reliability Operations and Coordination, and Transmission Operations. These Reliability Standards were submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC), which the Commission has certified as the Electric Reliability Organization responsible for developing and enforcing mandatory Reliability Standards. The Reliability Standards were designed to prevent instability, uncontrolled separation, or cascading outages that adversely impact the reliability of the interconnection by ensuring that the reliability coordinator has the data necessary to assess its reliability coordinator area during the operations horizon and that it takes prompt action to prevent or mitigate instances of exceeding Interconnection Reliability. This book contains: - The complete text of the Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section

Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) directs the North American Electric Reliability Corporation to develop a new or modified Reliability Standard that addresses supply chain risk management for industrial control system hardware, software, and computing and networking services associated with bulk electric system operations. The new or modified Reliability Standard is intended to mitigate the risk of a cybersecurity incident affecting the reliable operation of the Bulk-Power System. This book contains: - The complete text of the Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section