Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites

Principles of Electrical Engineering Materials and Devices has been developed to bridge the gap between traditional electronic circuits texts and semiconductor texts

This book provides the knowledge and understanding necessary to comprehend the operation of individual electronic devices that are found in modern micro-electronics. As a textbook, it is aimed at the third-year undergraduate curriculum in electrical engineering, in which the physical electronic properties are used to develop an introductory understanding to the semiconductor devices used in modern micro-electronics. The emphasis of the book is on providing detailed physical insight into the microscopic mechanisms that form the cornerstone for these technologies. Mathematical treatments are therefore kept to the minimum level necessary to achieve suitable rigor. * Covers crystalline structure * Thorough introduction to the key principles of quantum mechanics * Semiconductor statistics, impurities, and controlled doping * Detailed analysis of the operation of semiconductor devices, including p-n junctions, field-effect transistors, metal-semiconductor junctions and bipolar junction transistors * Discussion of optoelectronic devices such as light-emitting diodes (LEDs) and lasers * Chapters on the device applications of dielectrics, magnetic materials, and superconductors

Principles of Electronic Materials and Devices, Third Edition, is a greatly enhanced version of the highly successful text Principles of Electronic Materials and Devices, Second Edition. It is designed for a first course on electronic materials given in Materials Science and Engineering, Electrical Engineering, and Physics and Engineering Physics Departments at the undergraduate level. The third edition has numerous revisions that include more beautiful illustrations and photographs, additional sections, more solved problems, worked examples, and end-of-chapter problems with direct engineering applications. The revisions have improved the rigor without sacrificing the original semiquantitative approach that both the students and instructors liked and valued. Some of the new end-of-chapter problems have been especially selected to satisfy various professional engineering design requirements for accreditation across international borders. Advanced topics have been collected under Additional Topics, which are not necessary in a short introductory treatment.

Think like an electron Organic electronic materials have many applications and potential in low-cost electronics such as electronic barcodes and in light emitting devices, due to their easily tailored properties. While the chemical aspects and characterization have been widely studied, characterization of the electrical properties has been neglected, and classic textbook modeling has been applied. This is most striking in the analysis of thin-film transistors (TFTs) using thick “bulk” transistor (MOS-FET) descriptions. At first glance the TFTs appear to behave as regular MOS-FETs. However, upon closer examination it is clear that TFTs are unique and merit their own model. Understanding and interpreting measurements of organic devices, which are often seen as black-box measurements, is critical to developing better devices and this, therefore, has to be done with care. Electrical Characterization of Organic Electronic Materials and Devices Gives new insights into the electronic properties and measurement techniques for low-mobility electronic devices Characterizes the thin-film transistor using its own model Links the phenomena seen in different device structures and different measurement techniques Presents clearly both how to perform electrical measurements of organic and low-mobility materials and how to extract important information from these measurements Provides a much-needed theoretical foundation for organic electronics

Mechanical and thermal properties are reviewed and electrical and magnetic properties are emphasized. Basics of symmetry and internal structure of crystals and the main properties of metals, dielectrics, semiconductors, and magnetic materials are discussed. The theory and modern experimental data are presented, as well as the specifications of materials that are necessary for practical application in electronics. The modern state of research in nanophysics of metals, magnetic materials, dielectrics and semiconductors is taken into account, with particular attention to the influence of structure on the physical properties of nano-materials. The book uses simplified mathematical treatment of theories, while emphasis is placed on the basic concepts of physical phenomena in electronic materials. Most chapters are devoted to the advanced scientific and technological problems of electronic materials; in addition, some new insights into theoretical facts relevant to technical devices are presented. Electronic Materials is an essential reference for newcomers to the field of electronics, providing a fundamental understanding of important basic and advanced concepts in electronic materials science. Provides important overview of the fundamentals of electronic materials properties significant for device applications along with advanced and applied concepts essential to those working in the field of electronics Takes a simplified and mathematical approach to theories essential to the understanding of electronic materials and summarizes important takeaways at the end of each chapter Interweaves modern experimental data and research in topics such as nanophysics, nanomaterials and dielectrics

Fachlich auf höchstem Niveau, visuell überzeugend und durchgängig farbig illustriert: Das ist die neue Auflage der praxisbewährten Einführung in spezialisierte elektronische Materialien und Bauelemente aus der Informationstechnologie. Über ein Drittel des Inhalts ist neu, alle anderen Beiträge wurden gründlich überarbeitet und aktualisiert.