The different chapters of this book cover a large range of information regarding electrical actuators, including: synchronous and asynchronous machine modeling in order to measure and identify offline and online parameters using modern optimization methods; identification in real time of parameters with Luenberger filter and the extended Kalman filter; estimation of non-measurable variables, first by linear estimates and observers, then by lower observers. Robustness is a very problematic issue, as well, which is fully explored in a chapter dedicated to the subject. Finally, the estimate of non-measurable mechanical variables is particularly dealt with: estimate of load moment, then observation of the positioning of a command without mechanical sensor. The conditions to measure variables and real implementation of numerical algorithms are also examined with particular attention.

Linear electric actuators (LEAs) and linear electric generators (LEGs) are widely used electromagnetic devices. This book deals with LEAs that convert electric energy into controlled mechanical motion of limited travel and LEGs that transform mechanical energy into electric energy. Examples range from loudspeakers and microphones to magnetically levitated material transfer in ultraclean rooms. Much of the literature on linear actuators and generators covers the principles of operation and performance calculations of these devices. Little has been published on their control or on detailed design methodologies. This book presents the first unified treatment of the subject, including the construction, operation, control and design of LEAs and LEGs. Chapters describe linear induction, permanent-magnet, linear reluctance, switched reluctance, and linear stepper actuators, as well as various types of linear electric generators. The text is amply illustrated with numerous design examples.

As demand has increased for new types of equipment that are more suited to the ever-evolving world of industry, demand for both new and traditional types of actuators has soared. From automotive and aeronautical to biomedical and robotics, engineers are constantly developing actuating devices that are adapted to their particular needs in their particular field, and actuators are used in almost every field of engineering that there is. This volume not only lays out the fundamentals of actuators, such as how they operate, the different kinds, and their various applications, but it also informs the engineer or student about the new actuators that are being developed and the state-of-the-art of actuators. Edited and written by highly experienced and well-respected engineers with a deep understanding of their subject, there is no other volume on actuators that is more current or comprehensive. Whether as a guide for the latest innovations in actuators, a refresher reference work for the veteran engineer, or an introductory text for the engineering student, this is a must-have for any engineer’s or university’s library. Covering the theory and the practical applications, this breakthrough volume is a “one stop shop” for any engineer or student interested in actuators.

This book deals with LEAs that convert electric energy into controlled mechanical motion of limited travel and LEGs that transform mechanical energy into electric energy. Examples range from loudspeakers and microphones to magnetically levitated material transfer in ultraclean rooms. Much of the literature on linear actuators and generators covers the principles of operation and performance calculations of these devices. Little has been published on their control or on detailed design methodologies. This book presents the first unified treatment of the subject, including the construction, operation, control, and design of LEAs and LEGs. Chapters describe linear induction, permanent-magnet, linear reluctance, switched reluctance, and linear stepper actuators, as well as various types of linear electric generators. The text is amply illustrated with numerous design examples, and will appeal to graduate students and researchers in electrical, mechanical, and design engineering.

This book presents recent results on fault diagnosis and condition monitoring of airborne electromechanical actuators, illustrating both algorithmic and hardware design solutions to enhance the reliability of onboard more electric aircraft. The book begins with an introduction to the current trends in the development of electrically powered actuation systems for aerospace applications. Practical examples are proposed to help present approaches to reliability, availability, maintainability and safety analysis of airborne equipment. The terminology and main strategies for fault diagnosis and condition monitoring are then reviewed. The core of the book focuses on the presentation of relevant case studies of fault diagnosis and monitoring design for airborne electromechanical actuators, using different techniques. The last part of the book is devoted to a summary of lessons learned and practical suggestions for the design of fault diagnosis solutions of complex airborne systems. The book is written with the idea of providing practical guidelines on the development of fault diagnosis and monitoring algorithms for airborne electromechanical actuators. It will be of interest to practitioners in aerospace, mechanical, electronic, reliability and systems engineering, as well as researchers and postgraduates interested in dynamical systems, automatic control and safety-critical systems. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Authored by a team of acknowledged experts, this book presents a multidisciplinary view of the state of the art in the field of actuators. The goal of the book is to provide a comprehensive overview of the properties, applications, and potential applications of traditional and unconventional actuators, together with their corresponding power electronics. Special attention is paid to the objective assessment of competing actuator principles. The book is written primarily for designers and engineers in research and development, but will also be valuable as a textbook for students of automation engineering, mechatronics and adaptronics.

This book covers the key elements of physical systems modeling, sensors and actuators, signals and systems, computers and logic systems, and software and data acquisition. It describes mathematical models of the mechanical, electrical, and fluid subsystems that comprise many mechatronic systems.