Electric road systems (ERS) enable dynamic charging—the most energy efficient and economical way to decarbonize road vehicles. ERS draw electrical power directly from the grid and enable vehicles with small batteries to operate without the need to stop for charging. The three main technologies (i.e., overhead catenary lines, road-bound conductive tracks, and inductive wireless systems in the road surface) are all technically proven; however, no highway system has been commercialized. Electric Road Systems for Dynamic Charging discusses the technical and economic advantages of dynamic charging and questions the current investment in battery-powered and hydrogen-fueled vehicles. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022007

This book details the design and technology of the on-line electric vehicle (OLEV) system and its enabling wireless power-transfer technology, the “shaped magnetic field in resonance” (SMFIR). The text shows how OLEV systems can achieve their three linked important goals: reduction of CO2 produced by ground transportation; improved energy efficiency of ground transportation; and contribution to the amelioration or prevention of climate change and global warming. SMFIR provides power to the OLEV by wireless transmission from underground cables using an alternating magnetic field and the reader learns how this is done. This cable network will in future be part of any local smart grid for energy supply and use thereby exploiting local and renewable energy generation to further its aims. In addition to the technical details involved with design and realization of a fleet of vehicles combined with extensive subsurface charging infrastructure, practical issues such as those involved with pedestrian safety are considered. Furthermore, the benefits of reductions in harmful emissions without recourse to large banks of batteries are made apparent. Importantly, the use of Professor Suh’s axiomatic design paradigm enables such a complicated transportation system to be developed at reasonable cost and delivered on time. The book covers both the detailed design and the relevant systems-engineering knowledge and draws on experience gained in the successful implementation of OLEV systems in four Korean cities. The introduction to axiomatic design and the in-depth discussion of system and technology development provided by The On-line Electric Vehicle is instructive to graduate students in electrical, mechanical and transportation engineering and will help engineers and designers to master the efficient, timely and to-cost implementation of large-scale networked systems. Managers responsible for the running of large transportation infrastructure projects and concerned with technology management more generally will also find much to interest them in this book.

This title addresses the need to develop new freight transport models and scientific tools to provide sound solutions that consider the wide range of internal and external impacts. The international contributions push forward frontiers in freight transport modelling and analysis.

From mobile, cable-free re-charging of electric vehicles, smart phones and laptops to collecting solar electricity from orbiting solar farms, wireless power transfer (WPT) technologies offer consumers and society enormous benefits. Written by innovators in the field, this comprehensive resource explains the fundamental principles and latest advances in WPT and illustrates key applications of this emergent technology. Key features and coverage include: The fundamental principles of WPT to practical applications on dynamic charging and static charging of EVs and smartphones. Theories for inductive power transfer (IPT) such as the coupled inductor model, gyrator circuit model, and magnetic mirror model. IPTs for road powered EVs, including controller, compensation circuit, electro-magnetic field cancel, large tolerance, power rail segmentation, and foreign object detection. IPTs for static charging for EVs and large tolerance and capacitive charging issues, as well as IPT mobile applications such as free space omnidirectional IPT by dipole coils and 2D IPT for robots. Principle and applications of capacitive power transfer. Synthesized magnetic field focusing, wireless nuclear instrumentation, and future WPT. A technical asset for engineers in the power electronics, internet of things and automotive sectors, Wireless Power Transfer for Electric Vehicles and Mobile Devices is an essential design and analysis guide and an important reference for graduate and higher undergraduate students preparing for careers in these industries.

This volume presents papers on the topics covered at the National Academy of Engineering's 2017 US Frontiers of Engineering Symposium. Every year the symposium brings together 100 outstanding young leaders in engineering to share their cutting-edge research and innovations in selected areas. The 2017 symposium was held September 25-27 at the United Technologies Research Center in East Hartford, Connecticut. The intent of this book is to convey the excitement of this unique meeting and to highlight innovative developments in engineering research and technical work.

This book describes the fundamentals and applications of wireless power transfer (WPT) in electric vehicles (EVs). Wireless power transfer (WPT) is a technology that allows devices to be powered without having to be connected to the electrical grid by a cable. Electric vehicles can greatly benefit from WPT, as it does away with the need for users to manually recharge the vehicles’ batteries, leading to safer charging operations. Some wireless chargers are available already, and research is underway to develop even more efficient and practical chargers for EVs. This book brings readers up to date on the state-of-the-art worldwide. In particular, it provides: • The fundamental principles of WPT for the wireless charging of electric vehicles (car, bicycles and drones), including compensation topologies, bi-directionality and coil topologies. • Information on international standards for EV wireless charging. • Design procedures for EV wireless chargers, including software files to help readers test their own designs. • Guidelines on the components and materials for EV wireless chargers. • Review and analysis of the main control algorithms applied to EV wireless chargers. • Review and analysis of commercial EV wireless charger products coming to the market and the main research projects on this topic being carried out worldwide. The book provides essential practical guidance on how to design wireless chargers for electric vehicles, and supplies MATLAB files that demonstrate the complexities of WPT technology, and which can help readers design their own chargers.

Despite the continuous development of electrochemical battery technology and the multitude of electric buses on offer, it is still not possible to exploit electric buses in urban transport on an all-day basis without the necessity of charging them. It is therefore necessary to build point-to-point contact charging stations or induction charging stations at the terminals. This will result in substantial financial outlays connected with the construction of the charging stations, and the need to extend stopping times at the terminals; there are also problems which could arise regarding the situations where the bus routes are. The alternative solution is a Dynamic Charging System of electric vehicles, also known as In Motion Charging (IMC). This book is devoted to the dynamic charging of electric buses using a trolleybus traction network. It was based on the author's scientific and research work carried out into the Gdynia trolleybus network. The requirements and limiting parameters for the infrastructure of the transport system based on dynamic loading are presented. Buy this book on degruyter.com“a href="https://www.degruyter.com/viewbooktoc/product/523745">https://www.degruyter.com/viewbooktoc/product/523745