Bridge deck simulators (BDSs), 6 in. (15 cm) concrete cubes with an embedded temperature probe, are intended as a cost-effective substitute for RWIS pavement sensors to represent conditions likely on bridge decks in an area near an RWIS station. In this study, the effectiveness of the BDSs to predict the temperature on nearby bridge decks was evaluated. Nine sites were selected by ODOT across the state of Ohio (six in northeastern region and three in southwestern region) which were instrumented with BDSs and Nu Metrics pavement sensors on the bridge deck and (with one exception) on the road surface off the bridge. The use of BDSs appears to be unique to Ohio. A survey in the state of Ohio indicated little use was being made of BDS information. RWIS temperature data collected at five minute intervals during winter season 2004-2005 were analyzed and the unusable data were weeded out by removing redundant entries, blank or incomplete entries, extreme temperature readings, and entries where sensor data were not updated. Correlation analysis was performed on the "cleaned" data from the nine sites for the air and BDS temperatures versus bridge deck and road temperatures, and also for air versus BDS temperatures. Separate correlations were made with all-day data and with nighttime data free of solar radiation effects. For both all-day and nighttime data, the BDS was found to better correlate with bridge deck and road temperatures than was the air temperature. The nighttime data were then further analyzed to determine 90%, 95%, 99% prediction limits for the prediction of bridge deck and road temperatures based on the BDS and air temperature values. Again, the prediction limits for bridge and road temperatures using the BDS were generally tighter than when using air temperature. Finite element analyses (FEA) were performed for the nine sites using ALGOR V18 software to investigate the temperature behavior of the bridge deck and the BDS for the air temperature profiles reflecting extreme positive and negative temperature gradients recorded at each site. The FEA modeling provided information about how the BDS and the bridge deck temperature change as a function of the air temperature and time. Larger concrete cube sizes, up to 24 in. (61 cm) on a side, were investigated with FEA in an exploratory manner. The 24 in. (61 cm) cube almost exactly matched the simulated bridge deck temperature profiles under a variety of air temperature loads. The FEA temperature profiles showed that the existing BDS does not always closely represent the true temperature behavior of the bridge deck, but that a concrete cube 4 times larger on a side would compare much better. Yearly training of maintenance personnel in the use of the BDS and RWIS is recommended

Weather has broad and significant effects on the roadway environment. Snow, rain, fog, ice, freezing rain, and other weather conditions can impair the ability of drivers to operate their vehicles safely, significantly reduce roadway capacity, and dramatically increase travel times. Multiple roadway activities, from roadway maintenance and construction to shipping, transit, and police operations, are directly affected by inclement weather. Some road weather information is available to users currently, however a disconnect remains between current research and operations, and additional research could yield important safety and economic improvements for roadway users. Meteorology, roadway technology, and vehicle systems have evolved to the point where users could be provided with better road weather information through modern information technologies. The combination of these technologies has the potential to significantly increase the efficiency of roadway operations, road capacity, and road safety. Where the Weather Meets the Road provides a roadmap for moving these concepts to reality.

The first and only comprehensive guide to best practices in winter road operations Winter maintenance operations are essential to ensure the safety, mobility, and productivity of transportation systems, especially in cold-weather climates, and responsible agencies are continually challenged to provide a high level of service in a fiscally and environmentally responsible manner. Sustainable Winter Road Operations bridges the knowledge gaps, providing the first up-to-date, authoritative, single-source overview and guide to best practices in winter road operations that considers the triple bottom line of sustainability. With contributions from experts in the field from around the world, this book takes a holistic approach to the subject. The authors address the many negative impacts on regional economies and the environment of poorly planned and inadequate winter road operations, and they make a strong case for the myriad benefits of environmentally sustainable concepts and practices. Best practice applications of materials, processes, equipment, and associated technologies and how they can improve the effectiveness and efficiency of winter operations, optimize materials usage, and minimize cost, corrosion, and environmental impacts are all covered in depth. Provides the first up-to-date, authoritative and comprehensive overview of best practices in sustainable winter road operations currently in use around the world Covers materials, processes, equipment, and associated technologies for sustainable winter road operations Brings together contributions by an international all-star team of experts with extensive experience in designing, implementing, and managing sustainable winter road operations Designed to bring professionals involved in transportation and highway maintenance and control up to speed with current best practice Sustainable Winter Road Operations is essential reading for maintenance professionals dealing with snow and ice control operations on highways, motorways and local roads. It is a valuable source of information and guidance for decision makers, researchers, and engineers in transportation engineering involved in transportation and highway maintenance. And it is an ideal textbook for advanced-level courses in transportation engineering.

The objective of the symposium was to provide a forum for the exchange of information about state-of-the-art research and technology applications to improve snow removal and ice control operations in transportation systems. Sixty-one papers were presented in the areas of policy and management, infrastructure and snow control, materials and applications, equipment, travel surface, environment and health, road weather information systems and forecasting, and safety and visibility. Papers were authored by maintenance engineers and researchers from Austria, the Czech Republic, Denmark, Finland, Germany, Japan, New Zealand, the Netherlands, Norway, Russia, Sweden, the United Kingdom, and the United States. Twenty-one of these papers are included in this publication.

"TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 449 : Strategies to Mitigate the Impacts of Chloride Roadway Deicers on the Natural Environment documents the range of methods, tools, and techniques used by transportation agencies to minimize the environmental impact of chloride-based roadway deicers"--Publisher's description.

This title gives an authoritative look at the use of Geographical Information Systems (GIS) in climatology and meterology. GIS provides a range of strategies, from traditional methods, such as those for hydromet database analysis and management, to new developing methods. As such, this book will provide a useful reference tool in this important aspect of climatology and meterology study.