The qualitative effect of air velocity on drying rate of lumber has long been known. This report provides quantification of the effects of air velocity on drying rate of individual eastern white pine boards. An empirical equation correlating moisture content with time during drying was used to aid in the analysis. The drying rate increased with air velocity for moisture contents above approximately 40% to 50%. The drying rate gradually decreased and tended to level off with air velocities above 3.05 to 3.56 m/s (600 to 700 ft/min) and moisture contents below approximately 80% to 90%. The results provide guidelines for selecting experimental air velocities in full-scale kiln tests.

This first volume in the Mosharaka for Research and Studies International Conference Proceedings series (P-MIC) contains peer-reviewed papers presented at the 1st International Congress on Engineering Technologies (EngiTek 2020). This event was held remotely on 16-18 June 2020, and hosted by the Faculty of Engineering, Jordan University of Science & Technology (Irbid, Jordan). The conference represented a major forum for professors, students, and professionals from all over the world to present their latest research results, and to exchange new ideas and practical experiences in the most cutting-edge areas of the field of engineering technologies. Topics covered include electrical engineering, computer science and electronics.