This book is a result of the author's work which was initiated about a decade ago and which, in the meantime, has resulted in his Ph.D. Thesis and several technical papers. The book deals with accurate modeling of electric machines during transient and steady states, a topic which has been usually avoided in the literature. The modeling techniques herein take into account all machine peculiarities, such as the type and connection of its windings, slotting, and saturation in the iron core. A special emphasis in the book is given to the exact physical interpretation of all phenomena which influence the machine's transient behavior. Besides the Introduction, the book has five chapters. The second chapter describes basic concepts of the magnetic equivalent circuit theory and has examples of magnetic equivalent circuits of several types of machines with their node potential equations. In the third chapter the transform matrices w' and w" of A.C. wind ings are derived. These matrices playa very important role in the magnetic equivalent circuit theory because they connect the quantities from the ma chine's magnetic equivalent circuit, branch fluxes, and mmfs with the ma chine's phase currents and fluxes.

This Second Edition extensively covers advanced issues/subjects in electric machines, starting from principles, to applications and case studies with ample graphical (numerical) results. This textbook is intended for second (and third) semester courses covering topics such as modeling of transients, control principles, electromagnetic and thermal finite element analysis, and optimal design (dimensioning). Notable recent knowledge with strong industrialization potential has been added to this edition, such as: Orthogonal models of multiphase a.c. machines Thermal Finite Element Analysis of (FEA) electric machines FEA–based–only optimal design of a PM motor case study Line start synchronizing premium efficiency PM induction machines Induction machines (three and single phase), synchronous machines with DC excitation, with PM-excitation, and with magnetically salient rotor and a linear Pm oscillatory motor are all investigated in terms of transients, electromagnetic FEM analysis and control principles. Case studies, numerical examples, and lots of discussion of FEM results for PMSM and IM are included throughout the book. The optimal design is treated in detail using Hooke–Jeeves and GA algorithms with case comparison studies in dedicated chapters for IM and PMSM. Numerous computer simulation programs in MATLAB® and Simulink® are available online that illustrate performance characteristics present in the chapters, and the FEM and optimal design case studies (and codes) may be used as homework to facilitate a deeper understanding of fundamental issues.

IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This fourth volume covers the following main topics: aero-engines; turbochargers; eolian (wind) generators; automotive rotating systems; and hydro power plants.

Electric energy is arguably a key agent for our material prosperity. With the notable exception of photovoltaic generators, electric generators are exclusively used to produce electric energy from mechanical energy. More than 60% of all electric energy is used in electric motors for useful mechanical work in various industries. This book presents the modeling, performance, design, and control of reluctance synchronous and flux-modulation machines developed for higher efficiency and lower cost. It covers one- and three-phase reluctance synchronous motors in line-start applications and various reluctance flux-modulation motors in pulse width modulation converter-fed variable speed drives. FEATURES Presents basic and up-to-date knowledge about the topologies, modeling, performance, design, and control of reluctance synchronous machines. Includes information on recently introduced reluctance flux-modulation electric machines (switched- flux, flux-reversal, Vernier, transverse flux, claw pole, magnetic-geared dual-rotor, brushless doubly fed, etc.). Features numerous examples and case studies throughout. Provides a comprehensive overview of all reluctance electric machines.

Based on author Ion Boldea’s 40 years of experience and the latest research, Linear Electric Machines, Drives, and Maglevs Handbook provides a practical and comprehensive resource on the steady improvement in this field. The book presents in-depth reviews of basic concepts and detailed explorations of complex subjects, including classifications and practical topologies, with sample results based on an up-to-date survey of the field. Packed with case studies, this state-of-the-art handbook covers topics such as modeling, steady state, and transients as well as control, design, and testing of linear machines and drives. It includes discussion of types and applications—from small compressors for refrigerators to MAGLEV transportation—of linear electric machines. Additional topics include low and high speed linear induction or synchronous motors, with and without PMs, with progressive or oscillatory linear motion, from topologies through modeling, design, dynamics, and control. With a breadth and depth of coverage not found in currently available references, this book includes formulas and methods that make it an authoritative and comprehensive resource for use in R&D and testing of innovative solutions to new industrial challenges in linear electric motion/energy automatic control.

This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.