Can decision makers meaningfully compare land versus sea options for waste disposal? Using available scientific data on waste behavior and new studies from East and West Coast dump sites, this book shows how to use a matrix approach to rank the ecological and health consequences of any combination of waste, site, and disposal system design.

A practical guide for the identification and management of a range of hazardous wastes, Waste Management Practices: Municipal, Hazardous, and Industrial integrates technical information including chemistry, microbiology, and engineering, with current regulations. Emphasizing basic environmental science and related technical fields, the book is an i

Waste management is a global problem that continues to increase with rapid industrialization, population growth, and economic development. As the world hurtles towards the urban future, the amount of Municipal Solid Waste (MSW) is growing very fast. Wastes are generally classified into solid, liquid, & gaseous and are broadly classified as household waste; municipal waste; commercial and non-hazardous industrial wastes; hazardous (toxic) industrial wastes; construction and demolition waste; health care wastes – waste generated in health care facilities (e.g. hospitals, medical research facilities); human and animal wastes; and incinerator wastes. The fast industrialization, urbanization, modern technology, and rapidly growing population in India have posed a serious challenge to the waste management. In India, per capita generation rate of municipal solid waste ranges from 0.2 to 0.5 kg/day. At present, the daily generation rate in South Asia, East Asia and the Pacific combined is approximately 1.0 million tons per day. Hazard management is essentially a problem solving process aimed at defining problems (identifying hazards), gathering information about them (assessing the risks) and solving them (controlling the risks). Integrated solid waste management is a comprehensive waste prevention, recycling, composting, and disposal programme. Disposing the waste in an environmentally friendly manner is highly crucial to all the nations of the world including India. The goal of urban solid waste management is to collect, treat and dispose of solid waste generated by the all the city dwellers in an environmentally, and socially satisfactory manner by using the most economical methods available. The major contents of the book are types of waste, human pathogens in animal agriculture production systems, pathogen reductions during waste treatment, aerosolization of pathogens etc. It will be a standard reference book for professionals, entrepreneurs, students, teachers, researchers, administrators, and planners of various disciplines who are directly or indirectly involved in the waste management. TAGS Best small and cottage scale industries, Better waste management, Biological Waste treatment techniques, Bio-medical Waste Management, Biomedical Waste treatment, Anaerobic lagoon techniques, Book about Waste Management, Book on Waste Management, Business guidance for Waste treatment, Chemical industry wastewater treatment, Dairy Waste treatment, Electronic Waste treatment, E-waste Management, E-Waste Management & Clean Technologies Treatment of E-waste for Safe Disposal, E-Waste Recycling Technologies, Farm Animal Waste treatment, Guidelines for Livestock Waste Management, Household Waste treatment, How to compost kitchen waste, How to make money from waste management, How to Start a Recycling Business - Opportunities & Ideas, How to start a successful Waste treatment business, How to start a waste disposal business, How to Start a Waste treatment Business, How to start waste management business in India, How to Start Waste treatment Industry in India, Industrial & Municipal Wastewater Treatment Processes, Industrial Waste Treatment book, Industrial Waste treatment, Industrial wastewater treatment, Is it a good idea to start up a waste management?, Kitchen waste management, Kitchen Waste treatment, Latest waste management technologies, Livestock Farm Waste treatment, Livestock waste disposal and management, Livestock waste treatment systems, Meat, Fish & Sea Food Industry Waste treatment, Modern waste management technologies, Most Profitable Waste treatment Business Ideas, Municipal Waste treatment, New small scale ideas in Waste treatment industry, Opening a Waste Management Business, Physical Waste treatment techniques, Poultry Waste treatment, Recycling and Treatment of E-waste, Setting up and opening your Waste treatment Business, Small Scale Waste treatment Projects, Solid waste treatment, Solid waste treatment methods, Solid waste treatment technologies, Starting a Waste Management Business, Starting a Waste treatment Business, Start-up Business Plan for Waste treatment, Start up Project for Waste treatment, Technology of Waste Management, Technology of Waste Treatment, Treatment and disposal of municipal waste, Treatment of Bio-Medical Waste, Treatment of kitchen waste, Waste disposal business plan, Waste Management & Processing Solutions, Waste Management and Recycling, Waste Management and Recycling Technology, Waste management business ideas, Waste management business opportunities, Waste management business plan, Waste Management Startups in India, Waste Recycling Business in India Business Plan, Waste Treatment and Disposal Methods, Waste treatment and waste disposal methods, Waste treatment Based Profitable Projects, Waste treatment Based Small Scale Industries Projects, Waste treatment Business, Waste treatment Industry in India, Waste treatment methods, Waste treatment process, Waste treatment Projects, Waste treatment technologies, Water Waste treatment, What is Waste Management and Methods of Waste Disposal?, What is waste treatment?

Waste Management is one of the key problems of modern society due to the ever-expanding volume and complexity of discarded domestic and industrial waste. Society is increasingly aware of the need to establish better practices and safer solutions for waste disposal. This requires further investigation into disposal methods and recycling as well as new technologies to monitor landfills, industrial mining wastes and chemical and nuclear repositories. This creates a need for more research on current disposal methods such as landfills, incineration, chemical and effluent treatment, as well as recycling, clean technologies, waste monitoring, public and corporate awareness and general education. Unfortunately, many of the policies adopted in the past were aimed at short term solutions without due regard to the long term implications on health and the environment, leading in many cases to the need to take difficult and expensive remedial action. The desired direction of Waste Management is towards sustainable strategies. The approach which has emerged as the most promising has been called 4Rs, where reduction, reuse, recycling and recovery are seen as the best actions. This largely decreases the volume of waste that needs final disposal. Recovery refers to the establishment of two new classifications, those of Secondary Raw Materials (SRM) and of Refuse Derived Fuel (RDF). They both relate to useful products obtained from waste and make a shift from the mere recycle or reuse – mostly seen as a way to reduce dumping – to the valuable employment of such matter within the production cycle. Another aspect of this revolution is happening subtly and gradually by people buying waste; particularly eWaste and some types of plastic, the so-called technical waste. This is happening due to the strong demand and high price of certain new materials and the possibility of sorting out waste in developing regions of the world. As a result, a market in Secondary Raw Materials (SRM) has developed. Covering various areas under the topic of Waste management, this volume contains a selection of papers presented at the 10th International Conference on Waste Management and the Environment.

Containing the proceedings from the 9th International Conference on Waste Management and the Environment, this book is a collection of research on current waste disposal methods, as well as highlighting better practices and safer solutions for the future. Waste Management is one of the key problems of modern society due to the ever-expanding volume and complexity of discarded domestic and industrial waste. Society is increasingly aware of the need to establish better practices and safer solutions for waste disposal. This requires further investigation into disposal methods and recycling as well as new technologies to monitor landfills, industrial mining wastes and chemical and nuclear repositories. This creates a need for more research on current disposal methods such as landfills, incineration, chemical and effluent treatment, as well as recycling, clean technologies, waste monitoring, public and corporate awareness and general education. The papers contained in this title form a collective record of scientific information and work on the current situation of waste management amongst professionals, researchers, government departments and local authorities.

An essential guide to how the different member countries of ISWA view and tackle their solid wastes problems. Entries for each country contain the following reference information. addresses and details of relevant government offices and technical and professional organizations detailed listing of national scientific and technical journals regular conferences and professional/industrial exhibitions statistical data on production and composition of municipal wastes information about waste collection and disposal systems information on industrial wastes and details details of relevant legislation This reference volume will be of use to administrators, industrial managers, policy makers, and researchers in the field of waste management.

Advanced Zero Waste Tools: Present and Emerging Waste Management Practices, Volume One in the Concepts of Advanced Zero Waste Tools series addresses the fundamental principles of zero waste that encourages the redesign of resource lifecycles so that products are reused. By promoting reuse and recycling, as well as prevention and product designs that consider the entire product lifecycle, the zero waste philosophy advocates for sustainability and environmental management and protection. This book takes the first step toward addressing the tools needed to implement zero waste, both on a practical and conceptual scale. In addition to environmental and engineering principles, the book also covers economic, toxicologic and regulatory issues, making it an important resource for researchers, engineers and policymakers working toward environmental sustainability. Uses fundamental, interdisciplinary and state-of-the-art coverage of zero waste research to provide an integrated approach to tools, methodology and indicators Covers current challenges, design and manufacturing technology, and sustainability applications Includes up-to-date references and web resources at the end of each chapter, as well as a webpage dedicated to providing supplementary information