Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.

Rapidly Quenched Metals, Volume I covers the proceedings of the Fifth International Conference on Rapidly Quenched Metals, held in Wurzburg, Germany on September 3-7, 1984. The book focuses on amorphous and crystalline metals formed by rapid quenching from the melt. The selection first covers the scope and trends of developments in rapid solidification technology, rapid solidification, and undercooling of liquid metals by rapid quenching. Discussions focus on experimental method, powders, strip, particulate production, consolidation, and alloys and alloy systems. The text then examines the solidification of undercooled liquid alloys entrapped in solid; crystallization kinetics in undercooled droplets; and grain refinement in bulk undercooled alloys. The manuscript tackles the undercooling of niobium-germanium alloys in a 100 meter drop tube; influence of process parameters on the cooling rate of the meltspinning process; and the mechanism of ribbon formation in melt-spun copper and copper-zirconium. The formation and structure of thick sections of rapidly-solidified material by incremental deposition and production of ultrafine dispersions of rare earth oxides in Ti alloys using rapid solidification are also mentioned. The selection is a valuable reference for physicists, chemists, physical metallurgists, and engineers.

Bulk metallic glasses are a new emerging field of materials with many desirable and unique properties. These amorphous materials have many diverse applications from structural applications to biomedical implants. This book provides a complete overview of bulk metallic glasses. It covers the principles of alloy design, glass formation, processing, atomistic modeling, computer simulations, mechanical properties and microstructures.

This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.

Metallic glasses and amorphous materials have attracted much more attention in the last two decades. A noncrystalline solid produced by continuous cooling from the liquid state is known as a glass. From the other point of view, a noncrystalline material, obtained by any other process, for example, vapor deposition or solid-state processing methods such as mechanical alloying, but not directly from the liquid state, is referred to as an amorphous material. At this moment, bulk metallic glasses (BMG) are appearing as a new class of metallic materials with unique physical and mechanical properties for structural and functional usage. Extreme values of strength, fracture toughness, magnetic properties, corrosion resistance, and other properties have been registered in BMG materials.

The present book focuses on the practical characteristics and applications of bulk amorphous alloys. The topics covered include: mechanical properties, corrosioin resistance, soft magnetic properties, magnetostrictive properties, hard magnetic properties, viscous flow, micro-formability, consolidation behaviour, dispersion strengthened by ceramic particles, nanocrystallization effects and cold workability. A previous volume on bulk amorphous alloys (published as Materials Science Foundations Vol. 4, 1998) dealt with the preparation and fundamental characteristics of bulk amorphous alloys.