The last four years since the publication of the first of this series have seen further striking developments in both the science and technology of oriented polymers. In particular, polymers possessing very high degrees of molecular orientation are now quite commonplace, and this is reflected by the inclusion of five chapters dealing with ultra-high modulus polyethylene fibres, oriented liquid crystalline polymers (both lyotropics and thermo tropics) and polydiacetylene single crystal fibres. At the same time there is continuing interest in the structure and properties of less highly oriented polymers and in the mechanisms of deformation in polymers. It is therefore good to have these themes represented also. I should like to thank the contributors for adhering to a rather tight time schedule, and the publishers for their cooperation, so that this book can provide up-to-date reviews of the state of the art in a rapidly moving area of polymer science. I. M. WARD v CONTENTS Preface.... . . . .. . . . . .. ... . . . . . . . . . .. . . .. . . . . . . ... ... v List of Contributors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX 1. Polymer Single Crystal Fibres ........................ .

Modern society makes increasing demands for novelty in materials and their properties which are ever more exacting. Crystalline polymers are in the forefront of this demand and improvements are constantly occurring across the entire range from existing materials of high tonnage to novel materials with application in information technology. The developments recorded in this volume reflect this situation. Chapter 1 is a comprehensive review of the polymer PHB, poly(hydroxybutyrate), which is new to industrial manufacturing but is a naturally occurring substance. It has potentially valuable properties but has excited interest especially because it is biodegradable. It may, therefore, provide one means of reducing environmental pollution. Improvements in existing materials, beyond those which are ob tainable by optimization of known variables, are most likely to come from understanding of structure-property relationships. Polymer is able to make effective science has now reached the stage where it synthesis of information from complementary techniques, leading to rapidly deepening understanding. Chapters 2, 3 and 4 are all con cerned with technical developments which are contributing substan tially to this synthesis. The possibilities of electron microscopy, specifically the characterization of lamellar microstructure, have been transformed by permanganic etching. Now real organization (which can be very different from what had previously been inferred) can be used as a basis for explaining polymeric properties. In Chapter 3, Mitchell and Windle give a critical account of the assessment of orientation in liquid crystalline polymers, a rapidly developing new field in which they have played a leading part.

FROM THE PREFACE Almost all polymeric systems are subjected to a flow field at least once along the route between preparation and application. . . . There is also an increased interest in predictive models on phase behavior and suitable techniques for characterizing the structure of these systems when subjected to flow. Multiphase polymeric systems are particularly susceptible to flow, which may cause orientation of species, morphological changes, and phase transitions. All these events may, in turn, affect the end product properties, such as permeability, electrical conductivity, [and] mechanical properties. In processing, escalating needs have evolved for optimization and development of novel and more uniform product properties and increased productivity. In order to arrive at an understanding of processing polymeric systems under elastic flow conditions, it is convenient to analyze the basic physical mechanisms under conditions that enable development of predictive models in conjunction with controlled experimentation. . . . In recent years, the science of rheo-physics has evolved and now involves both advanced theories and experimental techniques. Rheo-physics means the rheological, morphological, and thermodynamic behavior of structured polymer systems during flow. . . . In this monograph, the rheo-optical techniques are . . . emphasized. The book gives an introduction to rheo-physics, including fundamentals of theories, and a representative selection of applications of rheo-optical techniques for analyzing multiphase systems. The chapters contain both practical advice for the new experimenter . . . as well as review material for the experienced scientist.

In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.

The first edition of New Fibers was enthusiastically received by a worldwide audience and this second edition has provided an opportunity to revise and update its contents and examine new developments since 1990.There have been considerable changes in the nature of the fibers being produced, the production methods and in consumers' values and expectations. Since 1990, the march of high-tech fibers has continued, with an ever increasing sub-division to meet specialised applications, as in high performance, high-function and high-sense fibers.New research and development has produced fibers with high tenacity and modulus to give the super-fibers now used as industrial materials. The more aesthetic and comfortable modern lifestyle has given rise to improved Shin-gosen and it is this springboard that leads on to 'fibers for the next millennium', the subject of a new chapter. Another new chapter examines the resurgence of synthetic cellulosics since 1990, in particular the various solvent-spun fibers of the Lyocell and Tencell families.

The Physics of Polymers presents the elements of this important segment of material science, focusing on concepts above experimental techniques and theoretical methods. Written for graduate students of physics, material science and chemical engineering and for researchers working with polymers in academia and industry, the book introduces and discusses the basic phenomena which lead to the peculiar physical properties of polymeric systems. The revised and expanded Third Edition includes a new chapter dealing with conjugated polymers, explaining the physical basis of the characteristic electro-optic response, and the spectacular electrical conduction properties of conjugated polymers created by doping.

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Thermal Management Materials and Technologies; Advanced Sensor Technology; Geopolymers; and Computational Design, Modeling, and Simulation of Ceramics and Composites symposia.