Designing High-Fidelity Tube Preamps is a comprehensive guide to the design of small-signal, tube-based amplifiers. This book examines in unprecidented detail the inner workings and practical design of small signal stages, volume and tone controls, RIAA equalisation, power supplies and more. Aimed at intermediate to advanced-level hobbyists and professionals it teaches the principles of low-noise, low-distortion tube design, through easy-to-read explanations and minimal math. With over 400 diagrams and figures, and hundreds of real measurements of real circuits, it asserts itself as an essential handbook for any tube amp enthusiast.

Designing Tube Preamps for Guitar and Bass is the most comprehensive guide to the design of tube-based preamplifiers for musical instrument use, in a single volume. From the input to the phase inverter this book discusses in detail the inner workings and practical design of every part of a conventional guitar preamp, including the use of triodes, pentodes, tone controls, effects loops and much more. This second edition is fully revised and includes four new chapters covering noise, signal switching, topology, and grounding. Aimed at intermediate-level hobbyists and circuit designers, it explores how to manipulate distortion and maximise performance for the perfect tone. With easy-to-read explanations, minimal math and over 250 diagrams and figures, it is an essential handbook for any tube amp enthusiast!

Designing Power Supplies for Valve Amplifiers is a unique guide to the operation and practical design of linear power supplies, especially for valve equipment. Audiophiles, guitarists and general hobbyists alike will find this book an invaluable source of detailed information on transformers, rectifiers, smoothing, high-voltage series and shunt regulators, and much more. Although this book is not intended for the beginner, learning is encouraged through practical design, and concepts are introduced at a basic level before the reader is accelerated to the stage of high-performance design, with over 200 circuit diagrams and figures. Numerous practical circuits are included, for high-voltage stabilisers, heater regulators, optimised bias circuits, high-voltage supplies using 'junk box' parts, and even audio power control for guitar amplifiers. An essential handbook for any valve amplifier enthusiast!

Building Valve Amplifiers is a unique hands-on guide for anyone working with tube audio equipment--as an electronics hobbyist, audiophile or audio engineer. This 2nd Edition builds on the success of the first with technology and technique revisions throughout and, significantly, a major new self-build project, worked through step-by-step, which puts into practice the principles and techniques introduced throughout the book. Particular attention has been paid to answering questions commonly asked by newcomers to the world of the valve, whether audio enthusiasts tackling their first build or more experienced amplifier designers seeking to learn about the design principles and trade-offs of "glass audio." Safety considerations are always to the fore, and the practical side of this book is reinforced by numerous clear illustrations throughout. The only hands-on approach to building valve and tube amps--classic and modern--with a minimum of theory Design, construction, fault-finding, and testing are all illustrated by step-by-step examples, enabling readers to clearly understand the content and succeed in their own projects Includes a complete self-build amplifier project, putting into practice the key techniques introduced throughout the book