This work offers an introduction to the importance of quality and reliability in product development, and to capable design, focusing on producing designs that meet quality standards. It looks at reliable design, introducing the probabilistic concept of reliability into the product design.

Practical methods for analysing mechanical designs with respect to their capability and reliability are combined in this volume. The book is written with postgraduate students and professional engineers in mind.

A unique, design-based approach to reliability engineering Design for Reliability provides engineers and managers with a range of tools and techniques for incorporating reliability into the design process for complex systems. It clearly explains how to design for zero failure of critical system functions, leading to enormous savings in product life-cycle costs and a dramatic improvement in the ability to compete in global markets. Readers will find a wealth of design practices not covered in typical engineering books, allowing them to think outside the box when developing reliability requirements. They will learn to address high failure rates associated with systems that are not properly designed for reliability, avoiding expensive and time-consuming engineering changes, such as excessive testing, repairs, maintenance, inspection, and logistics. Special features of this book include: A unified approach that integrates ideas from computer science and reliability engineering Techniques applicable to reliability as well as safety, maintainability, system integration, and logistic engineering Chapters on design for extreme environments, developing reliable software, design for trustworthiness, and HALT influence on design Design for Reliability is a must-have guide for engineers and managers in R&D, product development, reliability engineering, product safety, and quality assurance, as well as anyone who needs to deliver high product performance at a lower cost while minimizing system failure.

The book develops the root-cause approach to reliability - often referred to as "physics of failure" in the reliability engineering field. It approaches the subject from the point of view of a process and integrates the necessary methods to support that process. The book can be used to teach first- or second-year postgraduate students in mechanical, electrical, manufacturing and materials engineering about addressing issues of reliability during product development. It will also serve practicing engineers involved in the design and development of electrical and mechanical components and systems, as a reference.

Design Engineering Manual offers a practical guide to the key principles of design engineering. It features a compilation of extracts from several books within the range of Design Engineering books in the Elsevier collection. The book is organized into 11 sections. Beginning with a review of the processes of product development and design, the book goes on to describe systematic ways of choosing materials and processes. It details the properties of modern metallic alloys including commercial steels, cast irons, superalloys, titanium alloys, structural intermetallic compounds, and aluminum alloys. The book explains the human/system interface; procedures to assess the risks associated with job and task characteristics; and environmental factors that may be encountered at work and affect behavior. Product liability and safety rules are discussed. The final section on design techniques introduces the design process from an inventors perspective to a more formal model called total design. It also deals with the behavior of plastics that influence the application of practical and complex engineering equations and analysis in the design of products. Provides a single-source of critical information to the design engineer, saving time and therefore money on a particular design project Presents both the fundamentals and advanced topics and also the latest information in key aspects of the design process Examines all aspects of the design process in one concise and accessible volume

Traditionally, the way to test a product's reliability was to build it--and then try to break it. As systems and technologies improved, TAAF (Test, Analyze, and Fix) methodologies were developed and adopted. In today's global economy with its short, technologically-intense product life cycles, TAAF cannot suffice. Reliability can no longer be a step or a series of steps in product development; it is something that needs to be acknowledged upfront and built into the product from its very conception. Reliability, in other words, must be "designed in." Product developers now have many tools--software and hardware--at their disposal for building reliability in from the get-go. From the organizational point of view, what better way to design in reliability than to make designers themselves responsible for the reliability of their designs? As Mike Silverman and Adam Bahret explain in "How Reliable Is Your Product?," this is why the role of the reliability engineer is changing to one of mentor. Product developers are now responsible for going out and finding the best testing tools and then training the designers on their use, so designers can factor and build in reliability at every stage of product design. Mike and Adam have focused on reliability throughout their career and have observed how the position of reliability in the organization evolved. In this book, they condense their expertise and experience into a volume of immense practical worth to the engineering and engineering management communities, including designers, manufacturing engineers, and reliability/quality engineers. Among other things, Mike and Adam discuss how reliability fits, or should fit, within the product design cycle. They provide a high-level overview of reliability techniques available to engineers today. They lucidly describe the design of experiments and the role of failure management. With case studies and narratives from personal experience, they offer optimal ways to utilize different reliability techniques. They highlight common errors of judgment, missteps, and sub-optimal decisions that are often made within organizations on the path to total reliability. With"How Reliable is Your Product? (2nd Edition)," Mike Silverman and Adam Bahret have delivered what few have done before: a comprehensive yet succinct overview of the field of reliability engineering and testing. Engineers and engineering managers will find much in this book of immediate practical value.

This monograph presents state-of-the-art knowledge in wood manufacturing design with a special focus on the elaboration of functional relationships. The authors transfer and apply the method of functional relationships to challenges in wood manufacturing, and the book contains many worked examples which help the reader to better understand the presented method. The topical spectrum includes machining processes, energy consumption, surface quality, hardness and durability properties as well as aesthetical properties. The target audience primarily comprises research experts and practitioners in wood manufacturing, but the book may also be beneficial for graduate students alike.