This authoritative resource consolidates comprehensive information on the analysis and design of water supply systems into one practical, hands-on reference. After an introduction and explanation of the basic principles of pipe flows, it covers topics ranging from cost considerations to optimal water distribution design to various types of systems to writing water distribution programs. With numerous examples and closed-form design equations, this is the definitive reference for civil and environmental engineers, water supply managers and planners, and postgraduate students.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

Analysis of a Water Distribution Network may be necessary to know its behaviour under normal and deficient conditions and the design of a new network. Various methods such as Hardy Cross, Newton-Raphson, Linear Theory, and Gradient for static and time-dependent (extended period) analyses are described with small illustrative examples. The book also covers analysis considering withdrawal along links, head-dependent and performance-based analyses, calibration of existing networks, water quality modeling, analysis considering uncertainty of parameters, and reliability analysis of water distribution networks. Brief description of available computer softwares is also given.

Knowing how to manage the losses from water supply networks and how to get to the next level in bettering your system is a major problem and one that is most common in the majority of water companies worldwide. Sometimes water companies set their sights too high and cannot deliver due to non-realistic targets setting. Of course this is considered or seen as a failure within the company or country when it is really just exceeding expectations of what can be delivered. The aim of System Losses from Water Supply Networks is to assist water companies to identify where they are on the ‘water loss ladder’ and what is required to move to the next level. The book will provide an understanding of what the water companies need to achieve and where they should be aiming for in their efforts to reduce water losses. The book provides useful and practical information on non-revenue water (NRW) issues and solutions enriched with relevant case studies.

This is a best practice manual for addressing water losses in water distribution networks worldwide. Systems and methodologies are presented for improving water loss and leakage management in a range of networks, from systems with a well-developed infrastructure to those in developing countries where the network may need to be upgraded. The key feature of the manual is a diagnostic approach to develop a water loss strategy - using the appropriate tools to find the right solutions - which can be applied to any network. The methods of assessing the scale and volume of water loss are outlined, together with the procedures for setting up leakage monitoring and detection systems. As well as real losses (leakage) procedures for addressing apparent losses, by introducing regulatory and customer metering policies are explained. Suggestions are made for demand management and water conservation programmes, to complement the water loss strategy. Recommendations are made for training workshops and operation and maintenance programmes to ensure skills transfer and sustainability. The manual is illustrated throughout with case studies. Losses in Water Distribution Networks will appeal to a wide range of practitioners responsible for designing and managing a water loss strategy. These include consultants, operations managers, engineers, technicians and operational staff. It will also be a valuable reference for senior managers and decision makers, who may require an overview of the principles and procedures for controlling losses. The book will also be suitable as a source document for courses in Water Engineering, Resource Management and Environmental Management.

Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks deals with flows in pipes and channel networks from the standpoints of hydraulics and modelling techniques and methods. These engineering problems occur in the course of the design and construction of hydroenergy plants, water-supply and other systems. In this book, the author presents his experience in solving these problems from the early 1970s to the present day. During this period new methods of solving hydraulic problems have evolved, due to the development of computers and numerical methods. This book is accompanied by a website which hosts the author's software package, Simpip (an abbreviation of simulation of pipe flow) for solving non-steady pipe flow using the finite element method. The program also covers flows in channels. The book presents the numerical core of the SimpipCore program (written in Fortran). Key features: Presents the theory and practice of modelling different flows in hydraulic networks Takes a systematic approach and addresses the topic from the fundamentals Presents numerical solutions based on finite element analysis Accompanied by a website hosting supporting material including the SimpipCore project as a standalone program Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks is an ideal reference book for engineers, practitioners and graduate students across engineering disciplines.

Design of water distribution networks is traditionally based on trial-and-approach in which the designer assumes, based on experience and judgment, sizes of different elements and successively modifies them until a network with satisfactory hydraulic performance is obtained. This text covers: Essential hydraulic, economic optimization principles. Theory is developed gradually for optimal design of simple, single-source branched networks subjected to single loading to complex, multiple-source looped networks subjected to multiple loading. Strengthening and expansion of existing networks and also reliability-based design. Several illustrative examples enabling the reader to apply them in practice- approximately 100 line drawings.