Twelfth edition, 2009 of this book is based on IS: 800-2007 and also newly revised IS: 883-1994 (code of practice for timber structures). New code of practice, IS: 800 is likely to be issued soon. It is likely to introduce ``Limit State Design of Steel Structures''. Authors have distributed the text in thirty four chapters in main text and one chapter `on Location of Shear Centre' in Appendix A. Concept of Shear Centre and bending axis is important and significant and essentially needed to understand simple theory of bending and so also unsymmetrical bending. Complete-text has been updated and new matter added (e.g., elastic buckling, inelastic, stability and instability of columns and compression members, torsional-buckling, torsional-flexural buckling, etc.). Behaviour of web-stiffeners and web-panels specially near the end panels, tension-field action has been first time included to familiarise the students with the concept. Durability of steel members have been emphasized phenomenon of corrosion has been distinctly explained.

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Eight edition of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in 1989), and IS: 800-2007. Authors have distributed present text in the edition in thirty two chapters [that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium structures. In order to emphasize that similar to various other subjects, this subject is also very vast. Therefore, space steel structures and stressed-skin steel structures have been described special features of this new-edition of this book may be mentioned as under (1) Historical development of different types of steel bridges details of some spans of longest spans of various types of steel bridges, (2) Design of Guyed Steel Chimneys (3) Instantaneous Centre of Rotation (ICR) and Plastic Analysis of Pitched slope (i.e., gable structure) and influences of axial forces and shear forces on the plastic moment of resistance of the member cross-sections.

This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Geschwindner's 2nd edition of Unified Design of Steel Structures provides an understanding that structural analysis and design are two integrated processes as well as the necessary skills and knowledge in investigating, designing, and detailing steel structures utilizing the latest design methods according to the AISC Code.The goal is to prepare readers to work in design offices as designers and in the field as inspectors. This new edition is compatible with the 2011 AISC code as well as marginal references to the AISC manual for design examples and illustrations, which was seen as a real advantage by the survey respondents. Furthermore, new sections have been added on: Direct Analysis, Torsional and flexural-torsional buckling of columns, Filled HSS columns, and Composite column interaction. More real-world examples are included in addition to new use of three-dimensional illustrations in the book and in the image gallery; an increased number of homework problems; and media approach Solutions Manual, Image Gallery.

This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Method of Limit State (Ultimate Limit State, (ULS) and serviceability limit state (SLS)) present an improved design philosophy and makes allow-ance for the short-compings of working stress method (conventional and long time used in practice). This method provides basic framework, within which the performance of the steel structures may be assessed against various limiting conditions and invo-lves some concept of probability. Object of limit design method is to get steel structure that will remain fit for use during its life with acceptable target reliability. The probability of a limit state being reached during its life time is kept very small. This method has been broadly adopted in many developed countries and based on the recommendations of IS: 800-2007 (Third Revised Edition). This method has been covered in nine parts (in twenty six chapters and four appendices) as listed in contents. After introducing `Limit State Method of Design of Concrete Structures (LSD: CC) in IS: 456-1978, it was natural for Bureau of Indian Standard to introduce `Limit State Design of Steel Structures (LSD: SS). SI units for text for complete book, uncertainties involved in the working stress method and the concept of partial safety factors for the loads and strength of mate-rials (for yield and ultimate stresses reached) are the special feature of the book. Concepts of shear centre for thin-walled beam cross-sections and unsymmetrical bending of beams are important for various requirements and have been included in appendices. The text of book has been covered in about 1000 pages and 550 diagrams. The texts of various topics has been explained in many illustrative worked-out examples.