A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms

The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables

This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures. This valued textbook:Discusses all aspects of design of masonry structures in plain and reinforced masonry.summarizes materials properties and structural principles as well as describing structure and content of codes.Presents design procedures

The Reinforced Masonry Engineering Handbook provides the coefficients, tables, charts, and design data required for the design of reinforced masonry structures. This edition improves and expands upon previous editions, complying with the current Uniform Building Code and paralleling the growth of reinforced masonry engineering. Discussions include: materials strength of masonry assemblies loads lateral forces reinforcing steel movement joints waterproofing masonry structures and products formulas for reinforced masonry design retaining walls and more This comprehensive, useful book serves as an exceptional resource for designers, contractors, builders, and civil engineers involved in reinforced masonry - eliminating repetitious and routine calculations as well as reducing the time for masonry design.

A complete, accessible introduction to structural masonryfundamentals. This practical volume provides a thorough grounding in the designof masonry structures for buildings --with clear and easy-to-graspcoverage of basic materials, construction systems, building codes,industry standards, and simple computations for structural elementsof commonly used forms of masonry. Well-written and carefullyorganized, the book: * Includes all principal types of masonry materials: brick, stone,fired clay, concrete block, glass block, and more * Contains information on unreinforced, reinforced, and veneeredconstruction * Examines key design criteria: dead loads, live loads, lateralloads, structural planning, building code requirements, andperformance measurement * Features helpful study aids --including exercises and solutions,glossary of terms, bibliography, and detailed appendices. Requiring only minimal prior experience in engineering analysis ordesign, Simplified Design of Masonry Structures is ideal forself-study or classroom use. It is an essential reference forarchitecture and engineering students and professionals.

Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.