The multi-stage space elevator offers an alternative to the single-ribbon design, making it possible to construct the elevator with present-day materials. Details of the multi-stage design and technology are presented, including stability calculations, prototype planning and cost estimates.

In the last year, the International Space Elevator Consortium assessed that basic technological needs can be met with current capabilities: and, each segment of the Space Elevator Transportation System is ready for engineering validation. Because of the availability of a new material as a potential Space Elevator tether, the community strongly believes that a Space Elevator will be initiated in the near term. Included in the book is a series of appendices that are tremendous references to the status of the space elevator today. Included are a lexicon of space elevator terms, over 750 references in the bibliography, short descriptions of eight ISEC year-long studies and two IAA 4-year studies on space elevators, as well as a summary of over 20 Architectural Notes covering the development of space elevator technologies.

This study was designed to take the concept of Space Elevators and answer some questions relative to space debris. The team built upon the 2010 study on the topic and addressed many other issues to include: - The probabilities of orbital conjunctions between a space elevator and debris in Low Earth Orbit, Geo Earth Orbit, and Medium Earth Orbit. - The growth rate of space debris as it threatens operational space elevator (2010, 2019, 2030)? - Mitigation of risk for the space community through design, policies, operations, and lowering the threat. This year's study topic focused upon calculations for potential conjunction probabilities from densities of debris for 2010, 2019, and 2030. ""Space debris mitigation is an engineering problem with definable quantities such as density of debris and lengths/widths of targets. With proper knowledge and good operational procedures, the threat of space debris is not a show-stopper. However, mitigation approaches must be accepted and implemented robustly.""

The subject selected for this 2013 study is the Space Elevator Tether Climber. The objective of the one year study was to survey current concepts and technologies related to tether climbers, identify critical issues, questions, and concerns, assess their impact on the development of space elevators, and project towards the future. The following are a few of the conclusions: - The study used the concept of "constant power" as a baseline because of its ability to lower design requirements on the tether climber. - The mass breakout of 6 MT for a climber and 14 MT for customer payloads seems feasible. The estimate is that with a travel time of one week to GEO seven tether climbers can be on a tether simultaneously. - The communication architecture should be integrated into the space elevator infrastructure and nodal layout. - Solar power, as the sole source, appears achievable. - The use of laser power as the sole source also seems achievable.

The study team took on the challenge of expanding the "body of knowledge" pertaining to the Apex and Geosynchronous elements of the Space Elevator. A special effort was made to describe the elements in the context of an entire Space Elevator. The report complements and expands earlier ISEC Space Elevator reports on the Climber, Operations Concept, Architectures & Roadmaps, and Earth Port. To do so, we have established; 1. A robust set of definitions within the Geosynchronous and Apex Regions, and 2. The Strategic Approach to Architectural Development of a Space Elevator

The International Space Elevator Consortium 2017 study report recommends the development of a software simulator for the design, construction and operational phases of a space elevator. This report summarizes the use cases, requirements, design elements and concept of operations for such a simulator.

The International Space Elevator Consortium conducted a year-long study on the development of a space elevator Earth Port. This report addresses the functional requirements and missions leading to a mature engineering complex along the equator. The report represents the culmination of efforts by multiple contributors describing the functions and operations of the Earth Port and how it interacts with other space elevator nodes. The challenge was to bring in a fresh perspective on an Earth Port by leveraging experts in many fields beyond those normally associated with space elevators. As a result of the contributions from a variety of professional backgrounds, this study should reflect a more realistic perspective of the activities at the Earth Port of a future space elevator.