This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.

A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.

Handbook of Ceramics Grinding and Polishing meets the growing need in manufacturing industries for a clear understanding of the latest techniques in ceramics processing. The properties of ceramics make them very useful as components—they withstand high temperatures and are durable, resistant to wear, chemical degradation, and light. In recent years the use of ceramics has been expanding, with applications in most industry sectors that use machined parts, especially where corrosion-resistance is required, and in high temperature environments. However, they are challenging to produce and their use in high-precision manufacturing often requires adjustments to be made at the micro and nano scale. This book helps ceramics component producers to do cost-effective, highly precise machining. It provides a thorough grounding in the fundamentals of ceramics—their properties and characteristics—and of the abrasive processes used to manipulate their final shape as well as the test procedures vital for success. The second edition has been updated throughout, with the latest developments in technologies, techniques, and materials. The practical nature of the book has also been enhanced; numerous case studies illustrating how manufacturing (machining) problems have been handled are complemented by a highly practical new chapter on the selection and efficient use of machine tools. - Provides readers with experience-based insights into complex and expensive processes, leading to improved quality control, lower failure rates, and cost savings - Covers the fundamentals of ceramics side-by-side with processing issues and machinery selection, making this book an invaluable guide for downstream sectors evaluating the use of ceramics, as well as those involved in the manufacturing of structural ceramics - Numerous case studies from a wide range of applications (automotive, aerospace, electronics, medical devices)

This volume constitutes the Proceedings of a Symposium on the Plastic Deformation of Ceramic Materials, held at The Pennsylvania State University, University Park, Pennsylvania, July 17, 18, and 19, 1974. The theme of this conference focused on single crystal and polycrystalline deformation processes in ceramic materials. The 31 contributed papers by 52 authors, present a current understand ing of the theory and application of deformation processes to the study and utilization of ceramic materials. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the United States Atomic Energy Commission, The National Science Foundation, and The College of Earth and Mineral Sciences of The Pennsylvania State University. Special acknowledgment is extended to Drs. Louis C. Ianniello and Paul K. Predecki of the AEC and NSF, respectively. Of course, the proceedings would not have been possible without the excellent cooperation of the authors in preparing their manuscripts. Special appreciation is extended to the professional organi zation services provided by the J. Orvis Keller Conference Center of The Pennsylvania State University. In particular, Mrs. Patricia Ewing should be acknowledged for her excellent program organization and planning. Finally, we also wish to thank our secretaries for the patience and help in bringing these Proceedings to press.

The book gives a description of the failure phenomena of ceramic materials under mechanical loading, the methods to determine their properties, and the principles for material selection. The book presents fracture mechanical and statistical principles and their application to describe the scatter of strength and lifetime, while special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour. XXXXXXX Neuer Text Describing how ceramic materials fracture and fail under mechanical loading, this book provides methods for determining the properties of ceramics, and gives criteria for selecting ceramic materials for particular applications. It also examines the fracture-mechanical and statistical principles and their use in understanding the strength and durability of ceramics. Special chapters are devoted to creep behavior, criteria for multiaxial failure, and behavior under thermal shock. Readers will gain insight into the design of reliable ceramic components.

This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work. Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated techniques to produce a large variety of ceramic material. The chapters of this volume are ordered to help students with their laboratory experiments and guide their observations in parallel with lectures based on the current text. Thus, the first chapter is devoted to mechanical testing. A chapter of ductile and superplastic ceramic is added to emphasize their role in modern ceramics (chapter 2). These are followed by the theoretical basis of the subject. Various aspects of the mechanical properties are discussed in the following chapters, among them, strengthening mechanisms, time dependent and cyclic deformation of ceramics. Many practical illustrations are provided representing various observations encountered in actual ceramic-structures of particularly technical significance. A comprehensive list of references at the end of each chapter is included in this textbook to provide a broad basis for further studying the subject. The work also contains a unique chapter on a topic not discussed in other textbooks on ceramics concerning nanosized ceramics. This work will also be useful as a reference for materials scientists, not only to those who specialize in ceramics.

This volume "Deformation of Ceramic Materials II" constitutes the proceedings of an international symposium held at The Pennsyl vania State University, University Park, PA on July 20, 21, and 22, 1983. It includes studies of semiconductors and minerals which are closely related to ceramic materials. The initial conference on this topic was held in 1974 at Penn State and the proceedings were published in the volume entitled "Deformation of Ceramic Materials." This conference emphasized the deformation behavior of crystals and po1ycrysta11ine and polyphase ceramics with internationally recognized authorities as keynote lecturers on the major subtopics. Several papers dealing with cavity nucleation and creep crack growth represent a major new research thrust in ceramics since the first conference. This collection of papers represents the state-of-the art of our understanding of the plastic deformation behavior of ceramics and the crystals of which they are composed. We are grateful for the suggestions of our International Advisory Committee .in recommending experts in their respective countries to participate. We are particularly grateful that the organizers of the previous Dislocation-Point Defect Interaction Workshops agreed to participate in the Penn State Symposium as an alternative at the suggestion of Prof. A. H. Heuer. We acknowledge the financial support of the National Science Foundation for this conference.