This extensively revised and updated second edition of the only data handbook available on the engineering properties of commercial polymeric films details many physical, mechanical, optical, electrical, and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in the same family as well as materials in different families. Data are presented on the characteristics of 47 major plastic and elastomer packaging materials. New to this edition, the resin chapters each contain textual summary information including category, general description, processing methods, applications, and other facts as appropriate, such as reliability, weatherability, and regulatory approval considerations for use in food and medical packaging. Extensive references are provided. The resin chapter material supplier trade name product data are presented in graphical and tabular format, with results normalized to SI units, retaining the familiar format of the 1st edition and allowing easy comparison between materials and test conditions.

Many people, including those involved in the manufacturing, marketing and selling of lubricants, believe that blending lubricants is simply a matter of putting one or more base oils and several additives into a tank of some kind and stirring them around to mix them. Blending lubricants that meet customers’ demands requires much more than this. The correct ingredients of the right quality need to be used in precisely controlled quantities. The ingredients need to be tested prior to blending and the finished products need to be tested following blending. The ingredients need to be stored and mixed under carefully controlled conditions. The finished lubricants need to be stored and packaged carefully and then delivered to customers correctly. This book discusses all of these issues, describes the different types of equipment used to blend lubricants, provides guidance on how best to use this equipment, and offers tips and techniques to help to avoid problems. It focuses on liquid lubricants. Greases are not discussed, as their manufacture involves very different manufacturing procedures compared with those concerned with liquid lubricants. The book starts with descriptions and discussion of the properties and characteristics of the main types of mineral and synthetic base oils, as well as the properties and characteristics of the main types of additives that are used in lubricant formulations. Criteria and methodologies used to design both new and upgraded blending plants are covered next. The types and operation of the equipment used in lubricant blending plants are described and discussed, together with a chapter on how to avoid problems before, during, and after blending. Testing and analysis of base oils, additives, and blended lubricants are covered in two separate chapters. Procedures for quality control and quality management in lubricant blending plants are also discussed in two separate chapters. Types of packages for lubricants are reviewed, together with methods for filling packages and methods for transporting lubricants in bulk. The storage of lubricants and supply chain management is also covered in depth.

Advances in the material sciences, 3D printing technology, functional electrical stimulation, smart devices and apps, FES technology, sensors and microprocessor technologies, and more have lately transformed the field of orthotics, making the prescription of these devices more complex than ever before. Atlas of Orthoses and Assistive Devices, 5th Edition, brings you completely up to date with these changes, helping physiatrists, orthopaedic surgeons, prosthetists, orthotists, and other rehabilitative specialists work together to select the appropriate orthotic device for optimal results in every patient. - Provides an introduction to Brain-Computer Interface (BCI) systems relating to Assistive Technology (AT) systems and orthotics. - Includes Key Points in every chapter so you can quickly access expert guidance. - Maintains a valuable balance of content that is essential for both physiatrists and orthopaedic surgeons. - Covers state-of-the-art topics in the areas of biomechanics, fabrication techniques, and construction of orthoses with advanced technologies. - Incorporates an all-new, vibrant full-color design to enhance illustrations and make navigation fast and easy. - Places greater emphasis on carbon fiber materials and lightweight thermoplastics. - Includes content on 3D printing technology and how it has revolutionized fabrication strategies. - Features a more in-depth discussion of sensors and microprocessor technologies, advances in FES technology with respect to orthotics, smart devices and relevant apps, and the use of scanner technology in orthotic fabrication. - Explains new orthotic devices and their indications from acute traumatic situations through chronic rehabilitation needs. - Expert ConsultTM eBook version included with purchase. This enhanced eBook experience allows you to search all of the text, figures, and references from the book on a variety of devices.

High pressure technology is used so extensively that it is almost impossible to catalogue the manyways in which our lives are enhanced by it. From pneumatic tires and household water supplies tomaterials such as crystals, plastics, and even synthetic diamond, there are countless materialsfabricated or shaped using high pressure technology. High Pressure Technology (in two volumes)presents the most up-to-date information available on the main features of this broad technology andthe processes which utilize it.Volume I: Equipment Design, Materials, and Properties covers three broad areas: the general operationof high pressure systems, including standard operating procedures and safety codes and measures;the technology of high pressure systems, such as components, vessel design, and materials of construction;and applied science at high pressure, including the properties of fluids and solids andmechanical properties. Volume II: Applications and Processes covers processes at high pressure andencompasses such topics as: catalytic chemical synthesis; polymerization; phase changes; criticalphenomena; liquefaction of gases; synthesis of single-crystal materials, diamond, and superhardmaterials; isostatic compacting; isostatic hot-pressing; hydrostatic forming of metals; hydraulic cutting;and applications of shock techniques.Written by recognized authorities in industry, government laboratories, and universities, High PressureTechnology is essential reading for the industrial practitioner, high pressure engineer, and researchscientist. In addition, it is a valuable textbook for students in mechanical, chemical, and materialsengineering courses.

Nanostructure is in the focus of science, and advanced scattering methods are significantly contributing to the solution of related questions. This volume includes 19 contributions to the field of polymers and scattering, collected on the occasion of Wilhelm Ruland’s 80th anniversary in October 2005. The contributions from leading scientists cover a wide range of topics concerning -Advanced polymer materials -Studies of nanostructure: From bone to nanotubes -Modern data evaluation methods for isotropic and anisotropic scattering data. The book is an excellent source of information with respect to recent developments and future applications related to this important field that extends from the engineering of advanced materials to the development of novel evaluation methods.

This book is a comprehensive reference manual that contains essential information on thermoforming processing and technology. The field of thermoforming is experiencing rapid development driven by commercial factors; millions of tons of polymers are manufactured for use in various applications, both as commodity and specialty polymers. Building on the previous edition published about ten years ago, this edition includes new, as well as, fully revised chapters and updated information on materials and processes. The book is designed to provide practitioners with essential information on processing and technology in a concise manner. The book caters to both engineers and experts by providing introductory aspects, background information, and an overview of thermoforming processing and technology. The troubleshooting section includes flowcharts to assist in correcting thermoforming processes. “Thermoforming: Processing and Technology” offers a complete account of thermoplastics, covering properties and forming, with chapters providing perspective on the technologies involved. Readers will find it: serves as a handy knowledge source for professionals who occasionally work on thermoforming projects or need to refresh their knowledge; offers a troubleshooting guide that can help to identify and solve challenges that may arise in thermoforming processes; provides insights into process optimization, helping businesses improve efficiency, reduce waste, and enhance the quality of thermoformed products; acts as a course book to inform students about the thermoforming process. Audience The book will be of interest to mechanical, materials engineers, and process engineers who are involved in designing and optimizing thermoforming processes; professionals in the manufacturing and production industries who use thermoforming as a manufacturing method, such as in the production of plastic packaging, automotive components, and consumer goods; scientists, researchers, and students in plastics/polymer engineering and technology, materials science, polymer technology; professionals responsible for ensuring product quality and compliance with industry standards.

Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.