The object of this handbook is to assemble a set of design methods for crystal oscillators in the frequency range of 1 KC to 200 MC with the aim of facilitating design, eliminating crystal unit misapplications, and reducing design costs. The handbook is not directed at the design of ultra-stable crystal oscillators, but rather at the non-temperature controlled, medium frequency stability oscillator commonly in use in many types of communications equipment. The handbook contains discussions of: (1) The electrical characteristics of crystal units, condition of usage, and methods of measurement. (2) Characteristics of tube and transistor amplifiers. (3) Characteristics of impedance transforming networks. (4) Detailed design information on series resonance and anti-resonance oscillators. (5) Design examples together with experimental evaluation data covering most of the 1 KC to 200 MC range. (Author).

Crystal oscillators have been in use now for well over SO years-one of the first was built by W. G. Cady in 1921. Today, millions of them are made every year, covering a range of frequencies from a few Kilohertz to several hundred Mega hertz and a range of stabilities from a fraction of one percent to a few parts in ten to the thirteenth, with most of them, by far, still in the range of several tens of parts per million.Their major application has long been the stabilization of fre quencies in transmitters and receivers, and indeed, the utilization of the frequency spectrum would be in utter chaos, and the communication systems as we know them today unthinkable,'without crystal oscillators. With the need to accommodate ever increasing numbers of users in a limited spectrum space, this traditional application will continue to grow for the fore seeable future, and ever tighter tolerances will have to be met by an ever larger percentage of these devices.

Oscillators are an important component in today's RF and microwave systems, and practitioners in the field need to know how to design oscillators for stability and top performance. Offering engineers broader coverage than other oscillator design books on the market, this comprehensive resource considers the complete frequency range, from low-frequency audio oscillators to more complex oscillators found at the RF and microwave frequencies. Packed with over 1,200 equations, the book gives professionals a thorough understanding of the principles and practice of oscillator circuit design and emphasizes the use of time-saving CAD (computer aided design) simulation techniques. From the theory and characteristics of oscillators, to the design of a wide variety of oscillators (including tuned-circuit, crystal, negative-resistance, and relaxation oscillators), this unique book is a one-stop reference practitioners can turn to again and again when working on their challenging projects in this field.

Electronic oscillators using an electromechanical device as a frequency reference are irreplaceable components of systems-on-chip for time-keeping, carrier frequency generation and digital clock generation. With their excellent frequency stability and very large quality factor Q, quartz crystal resonators have been the dominant solution for more than 70 years. But new possibilities are now offered by micro-electro-mechanical (MEM) resonators, that have a qualitatively identical equivalent electrical circuit. Low-Power Crystal and MEMS Oscillators concentrates on the analysis and design of the most important schemes of integrated oscillator circuits. It explains how these circuits can be optimized by best exploiting the very high Q of the resonator to achieve the minimum power consumption compatible with the requirements on frequency stability and phase noise. The author has 40 years of experience in designing very low-power, high-performance quartz oscillators for watches and other battery operated systems and has accumulated most of the material during this period. Some additional original material related to phase noise has been added. The explanations are mainly supported by analytical developments, whereas computer simulation is limited to numerical examples. The main part is dedicated to the most important Pierce circuit, with a full design procedure illustrated by examples. Symmetrical circuits that became popular for modern telecommunication systems are analyzed in a last chapter.

Oscillators have traditionally been described in books for specialist needs and as such have suffered from being inaccessible to the practitioner. This book takes a practical approach and provides much-needed insights into the design of oscillators, the servicing of systems heavily dependent upon them and the tailoring of practical oscillators to specific demands. To this end maths and formulae are kept to a minimum and only used where appropriate to an understanding of the theory. Once grasped, the theory of the general oscillator is easily put into practical use in actual oscillators. The final two chapters present a collection of oscillators from which the practising engineer or the hobbyist can obtain useful guidance for many kinds of projects. Irving Gottlieb is a leading author of many books for practising engineers, technicians and students of electronic and electrical engineering. First Newnes title by this best-selling author Clarity and crispness in an often obscure field

Presents quantitative design techniques for a wide range of harmonic oscillators, with emphasis on crystal oscillators. Discusses both theory and practical ``cookbook'' procedures and covers oscillator frequency stability, output power, and resonator drive power. Offers algorithms that can be programmed into a relatively simple computer to obtain an oscillator design. Also reviews basic theory for circuit networks, oscillator models, and small and large signal transistor characteristics.