This is the final report of the work performed under the LANL contract on neutron cross section evaluations for ENDF/B-VII (April 2005-May 2006). The purpose of the contract was to ensure seamless integration of the LANL neutron cross section evaluations in the new ENDF/B-VII library. The following work was performed: (1) LANL evaluated data files submitted for inclusion in ENDF/B-VII were checked and, when necessary, formal formatting errors were corrected. As a consequence, ENDF checking codes, run on all LANL files, do not report any errors that would rise concern. (2) LANL dosimetry evaluations for {sup 191}Ir and {sup 193}Ir were completed to match ENDF requirements for the general purpose library suitable for transport calculations. A set of covariances for both isotopes is included in the ENDF files. (3) Library of fission products was assembled and successfully tested with ENDF checking codes, processed with NJOY-99.125 and simple MCNP calculations. (4) KALMAN code has been integrated with the EMPIRE system to allow estimation of covariances based on the combination of measurements and model calculations. Covariances were produced for 155,157-Gd and also for 6 remaining isotopes of Gd.

Recently the new ENDF/B-VII. 1 library was released; this completely replaces the earlier ENDF/B-VII.0 library. One of the first questions we ask about a new library is: What's Different? Here I attempt to at least partially answer this question. I present results in both tabulated form (so you can quickly determine if any evaluations of interest to you have changed), and graphic form (so that you can see how much evaluations have changed and in what energy ranges). For the table I have compared what I refer to as the ENDF neutron data, namely MF=1 through 6. Here I did a character-by-character comparison of the same sections (MF/MT) that appear I both ENDF/B-VII.0 and VII. 1; here I found differences in 170 evaluations. For the plots I have only compared the total cross sections for all evaluations that are common to both libraries, and I found that of the 423 evaluations in ENDF/B-VII. 1, 120 of these have total cross sections that differ by 1% or more from the evaluation of the same isotope in ENDF/B-VII.0. This should be considered only a preliminary comparison; obviously there can be more subtle important differences that do not effect of total cross sections. Here I present plots comparing the total cross section of these 120 isotopes. The plots are only broad overviews of the total cross sections over their entire energy range. If you have interest in more detailed plots for specific evaluations, you can download the evaluations [1,2] and the PREPRO [3] codes I used to prepare and view the data. This is all I needed to do my comparisons, and is all you should need to do any more detailed comparisons to meet your individual needs.

This book describes the Proceedings of the International Conference on Nuclear Data for Science and Technology held at Jillich in May 1991. The conference was in a series of application oriented nuclear data conferences organized in the past under the auspices of the Nuclear Energy Agency-Nuclear Data Committee (NEANDC) and with the support of the Nuclear Energy Agency-Committee on Reactor Physics (NEACRP). It was the fIrst international conference on nuclear data held in Germany, with the scientific responsibility entrusted to the Institute of Nuclear Chemistry of the Research Centre Jillich. The scientific programme was established by the International Programme Committee in consultation with the International Advisers, and the NEA and IAEA cooperated in the organization. A total of 328 persons from 37 countries and fIve international organizations participated. The scope of these Proceedings extends to a wide range of interdisciplinary topics dealing with measu rement, calculation, evaluation and application of nuclear data, with a major emphasis on numerical data. Both energy and non-energy related applications are considered and due attention is given to some fundamental aspects relevant to the understanding of nuclear data.

The Cross Section Evaluation Working Group (CSEWG) released the ENDF/B-VII. 1 library on December 22, 2011. The ENDF/B-VII. 1 library is CSEWG's latest recommended evaluated nuclear data file for use in nuclear science and technology applications, and incorporates advances made in the five years since the release of ENDF/B-VII.0, including: many new evaluation in the neutron sublibrary (423 in all and over 190 of these contain covariances), new fission product yields and a greatly improved decay data sublibrary. This summary barely touches on the five years worth of advances present in the ENDF/B-VII. 1 library. We expect that these changes will lead to improved integral performance in reactors and other applications. Furthermore, the expansion of covariance data in this release will allow for better uncertainty quantification, reducing design margins and costs. The ENDF library is an ongoing and evolving effort. Currently, the ENDF data community embarking on several parallel efforts to improve library management: (1) The adoption of a continuous integration system to provide evaluators 'instant' feedback on the quality of their evaluations and to provide data users with working 'beta' quality libraries in between major releases. (2) The transition to new hierarchical data format - the Generalized Nuclear Data (GND) format. We expect GND to enable new kinds of evaluated data which cannot be accommodated in the legacy ENDF format. (3) The development of data assimilation and uncertainty propagation techniques to enable the consistent use of integral experimental data in the evaluation process.

An ENDF-6 compatible evaluation for neutron induced reactions in the resonance region has been completed for 182,183,184,186W. The parameters are the result of an analysis of experimental data available in the literature together with a parameter adjustment on transmission and capture data obtained at the time-of-flight facility GELINA. Complete evaluated data files in ENDF-6 format have been produced by joining the evaluations in the resonance region with corresponding files from the JEFF- 32T1 and ENDF/B-VII. 1 library. The evaluated files have been processed with the latest updates of NJOY. 99 to test their format and application consistency as well as to produce a continuous-energy data library in ACE format for use in Monte Carlo codes. The evaluated files will be implemented in the next release of the JEFF-3 library which is maintained by the Nuclear Energy Agency of the OECD.

The neutron cross sections for iron have been evaluated and placed in the ENDF/B format with the material (MAT) number 1101. The total cross section was evaluated from recent experimental measurements and is compatible with measurements from very thick sample penetration made at the Tower Shielding Facility. Other data were taken from evaluations by J.J. Schmidt as contained in the UKAEA Nuclear Data File, DFN 64. (Author).