Mineral scale deposits, corrosion, suspended matter, and microbiological growth are factors that must be controlled in industrial water systems. Research on understanding the mechanisms of these problems has attracted considerable attention in the past three decades as has progress concerning water treatment additives to ameliorate these concerns.

In a world in which legislation promotes the recycling of wastewater new technologies are emerging that can fulfil such a remit. The papers that comprise this volume explore those technologies and explain what is driving and what is preventing their widespread implementation.

This issue of ECS Transactions, ¿Corrosion in Marine and Saltwater Environments 3¿, is the continuation of successful symposia held in 1999 and 2004, hosted by The Electrochemical Society. The papers in this issue were presented at the 2008 PRiME meeting held in Honolulu, Hawaii, from October 12 to 17, 2008. The goal of this symposium was to address a wide spectrum of corrosion research in marine and other saltwater environments and to provide a forum to examine the most recent ideas and advances in the understanding of corrosion processes, mechanisms, and means of corrosion prevention or control from both a basic and applied research approach.

This handbook is derived from the online reference "Corrosion Handbook", bringing together the relevant information about corrosion protection and prevention for steels, one of the most widely used materials. It provides comprehensive information, including tabulated data and references, on the corrosion properties of the following materials: Unalloyed steels and cast steel, unalloyed cast iron, high-alloy cast iron, high-silicon cast iron, structural steels with up to 12% chromium, ferritic chromium steels with more than 12% chromium, ferritic-austenitic steels with more than 12% chromium, high-alloy multiphase steels, ferritic/perlitic-martensitic steels, ferritic-austenitic steels/duplex steels, austenitic chromium-nickel steels, austenitic chromium-nickel-molybdenum steels, austenitic chromium-nickel steels with special alloying additions, special iron-based alloys, and zinc. The following corrosive media are considered: Seawater, brackish water, industrial waste water, municipal waste water, drinking water, high-purity water.

ASCE MOP 60 & WEF MOP FD-5 provides theoretical and practical guidelines for the design and construction of gravity sanitary sewers.

Microbial growth and contamination ("Biofouling") in water systems represents a significant threat to the quality of waters produced for the microelectronic, pharmaceutical, petroleum, paper, food and other manufacturing industries. Biofouling can lead to biologically induced corrosion ("Biocorrosion"), which can cause severe damage to the equipment. Both biofouling and biocorrosion are frequently not recognized in time, underestimated, or linked with the wrong causes. The book represents a new approach by introducing biofilm properties and dynamics as basic principles of biofouling and biocorrosion, thus providing a better understanding and the means of fighting the undesired effects of biofilms. The most important features are: Case histories of biofouling in water treatment.- Detection and monitoring of biofouling.- Reverse osmosis membrane biofouling.- Biocide efficacy and biofouling control.- Plant design considerations for preventing biofouling.- Case histories of biocorrosion.- Detection, monitoring, control and prevention of biocorrosion.- Fundamentals of biofouling and biocorrosion mechanisms.