Chichester, West Sussex, Eng. : Ellis Horwood Limited for the Society of Chemical Industry, 1984.

Marine and Offshore Corrosion describes the principles of effective corrosion control treatments in marine environments, with emphasis on economic solutions to corrosion. The book explains chemical or electrochemical reaction of an alloy with its environment leading to corrosion, and mechanical loss of the metal by erosion, abrasion, or wear resulting also in corrosion. A main consideration of erosion control that the engineer should look into is the economic side. Other considerations that he should investigate are the strength of a structure, time for construction, availability of materials, and costs. The book also discusses the marine environment consisting of sea water, temperature fluctuations, dissolved gases, hydrogen sulphide, ammonia, carbon dioxide, electrical conductivity, fouling. The text describes the selection of materials to be used in marine environments, surface preparation of steel before painting, the type of paint, and metallic coatings. Some of the factors in selecting coating systems are: cost and estimated life before the first scheduled maintenance, adhesion properties, moisture tolerance, elasticity, chemical resistance, impact resistance, bacterial resistance. The factors affecting maintenance include environmental conditions, quality of initial protection applied, type of structure, as well as the design and purpose of the structure. The book has been prepared for engineers and designers who are not corrosion specialists but have to deal with marine corrosion problems as part of their day-to-day professional activities. The text will also turn out to be useful for engineers with general interest in structure, building, or machinery maintenance specially those located near coastal areas.

This volume contains the results of the third phase (1981 - 1987) of a research programme on the in-service behaviour of welded marine structures under fatigue and corrosion fatigue loading. The programme was undertaken in six EEC countries (Denmark, France, Germany, Italy, The Netherlands, United Kingdom) in close association with similar work being undertaken in Norway and Canada. In all, more than 40 research laboratories have been involved in an overall collaboration aimed at generating information relevant to the performance of offshore steel structures and fostering a precise degree of common technical understanding that will encourage the increased use of structural steel fabrications for the exploitation of offshore hydrocarbon reserves throughout the world. The programme has already produced tangible benefits for both the steel and oil industries through the contribution it has made to a better understanding of the behaviour of steel structures in marine environments as well as by providing the data necessary for the revision of codes of practice relating to the fabrication of these structures.

Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms