This book investigates the control and optimization of grid-tied power converters, with a special attention attached to pulse width modulation, which determines the size and cost of power converters as well as switching harmonics. Through the methods introduced in this book, multiple grid-tied power converters safely operate and coordinate in a highly efficient and reliable fashion, thereby boosting the operation of modern power grids. To facilitate understanding, the key methods are presented together with their associated algorithms and detailed software codes. In parallel to theoretical treatments, this book further applies the methods into practical scenarios and industrial products, thus enhancing their credibility. The book serves as a guidance for electrical engineers and researchers in the field of power electronics and power systems.

Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Power systems worldwide are going through a paradigm shift from centralized generation to distributed generation. This book presents the SYNDEM (i.e., synchronized and democratized) grid architecture and its technical routes to harmonize the integration of renewable energy sources, electric vehicles, storage systems, and flexible loads, with the synchronization mechanism of synchronous machines, to enable autonomous operation of power systems, and to promote energy freedom. This is a game changer for the grid. It is the sort of breakthrough — like the touch screen in smart phones — that helps to push an industry from one era to the next, as reported by Keith Schneider, a New York Times correspondent since 1982. This book contains an introductory chapter and additional 24 chapters in five parts: Theoretical Framework, First-Generation VSM (virtual synchronous machines), Second-Generation VSM, Third-Generation VSM, and Case Studies. Most of the chapters include experimental results. As the first book of its kind for power electronics-enabled autonomous power systems, it • introduces a holistic architecture applicable to both large and small power systems, including aircraft power systems, ship power systems, microgrids, and supergrids • provides latest research to address the unprecedented challenges faced by power systems and to enhance grid stability, reliability, security, resiliency, and sustainability • demonstrates how future power systems achieve harmonious interaction, prevent local faults from cascading into wide-area blackouts, and operate autonomously with minimized cyber-attacks • highlights the significance of the SYNDEM concept for power systems and beyond Power Electronics-Enabled Autonomous Power Systems is an excellent book for researchers, engineers, and students involved in energy and power systems, electrical and control engineering, and power electronics. The SYNDEM theoretical framework chapter is also suitable for policy makers, legislators, entrepreneurs, commissioners of utility commissions, energy and environmental agency staff, utility personnel, investors, consultants, and attorneys.

The energy landscape is shifting toward renewable energy sources to mitigate climate change and reduce dependence on fossil fuels. The integration of renewable energy sources into the power grid presents various challenges, including uncertainty and variability of renewable energy sources, grid stability, and management of energy storage. Power system operation and optimization play a crucial role in managing the energy supply-demand balance, reducing operational costs, and improving the reliability of the power system. This call for papers aims to bring together the latest research and practical applications related to power system operation and optimization in the context of high penetration of renewable energy sources. We welcome contributions from researchers and practitioners from a broad range of disciplines to shed light on the challenges and opportunities associated with renewable energy integration in power systems. The objective of this Research Topic is to explore the latest advances in power system operation and optimization with a focus on the high penetration of renewable energy sources. We invite potential authors to submit articles for publication on the Research Topic of Frontiers in Energy Research on Power System Operation and Optimization Considering the High Penetration of Renewable Energy.

Distributed Energy Resources in Microgrids: Integration, Challenges and Optimization unifies classically unconnected aspects of microgrids by considering them alongside economic analysis and stability testing. In addition, the book presents well-founded mathematical analyses on how to technically and economically optimize microgrids via distributed energy resource integration. Researchers and engineers in the power and energy sector will find this information useful for combined scientific and economical approaches to microgrid integration. Specific sections cover microgrid performance, including key technical elements, such as control design, stability analysis, power quality, reliability and resiliency in microgrid operation. - Addresses the challenges related to the integration of renewable energy resources - Includes examples of control algorithms adopted during integration - Presents detailed methods of optimization to enhance successful integration