This book presents All of the major topics in modern analog and digital control systems, along with the practical, applications oriented knowledge and skills needed by technicians. It contains user-friendly conceptual explanations and clearly written mathematical developments. Examples of both Mathcad and MATLAB illustrate computer problem solving--but this book emphasizes the ability to use any suitable software to achieve successful results in solving problems and performing design. Chapter topics include Measurement; Laplace Transforms; Control System Models; Static and Dynamic Response; Stability; Frequency Response Analysis; Root Locus; State Variable Analysis; Introduction to Discrete Control Systems; Z-Transforms and Discrete State-Space Analysis; Digital Signal Representations; Discrete Time Control Systems; Stability of Discrete Control Systems; and Advanced Topics in Control Systems. For engineers and technicians working for companies that integrate control systems with the use of programmable logic controllers.

A broad range of topics is covered in this easy-to-understand book on all aspects of control system design and analysis. It begins with a straightforward review of the mathematics required to understand control systems technology, followed by an analysis of both continuous and discrete forms of control systems. Coverage then progresses to the use of MATLABA(R) for the analysis and response simulation of control system functions, such as the use of the SISO design tool and the LTI Viewer functions. Frequency response methods and discrete time systems are also explored in depth, along with the methods used for producing the required simulations using MATLABA(R).

This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques

Control System Technology focuses on the processes, methodologies, and techniques employed in control system technology, including digital computers, transducers, actuators, and amplifiers. The book first takes a look at classification, terminology, and definitions, displacement, reference, and velocity of transducers, and strain, force, torque, acceleration, load, and tension of transducers. Discussions focus on strain gauges and measuring bridges, other transducers for measuring force, torque, acceleration, and tension, displacement and velocity transducers, natural control systems, classification of control systems, and generalized single loop continuous feedback control system. The monograph examines electric amplifiers and final control elements, hydraulic and pneumatic amplifiers and final control elements, flow control valves, actuators and positioners, and signal and data conversion. The publication also ponders on interfacing control systems to digital computers, control system performance and commissioning, and experimental testing of plant, system elements, and systems. The manuscript is a valuable reference for engineers and researchers interested in control system technology.

The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of the examples with fundamental mathematics along with simulations of the systems with their respective equations and stability calculations.

Thoroughly updated, this edition features new material on decibels, levers, friction, clutches and brakes, tooth rotor tachometers, vision sensors, dynamic braking of DC motors, linear motors, and flux vector AC drives. Also included is new information on popular PIC and BASIC Stamp microcontrollers, plus expanded coverage of brushless DC motors and networking used in control systems."--BOOK JACKET.