This book examines the operation of biological wastewater treatment plants (WWTPs), with a focus on maintaining effluent water quality while keeping operational costs within constrained limits. It includes control operation and decision schemes and is based on the use of benchmarking scenarios that yield easily reproducible results that readers can implement for their own solutions. The final criterion is the effect of the applied control strategy on plant performance – specifically, improving effluent quality, reducing costs and avoiding violations of established effluent limits. The evaluation of the different control strategies is achieved with the help of two Benchmark Simulation Models (BSM1, BSM2). Given the complexity of the biological and biochemical processes involved and the major fluctuations in the influent flow rate, controlling WWTPs poses a serious challenge. Further, the importance of control goal formulation and control structure design in relation to WWTP process control is widely recognized. Of particular interest are the regulations governing the compliance with effluent criteria. Authorities measure compliance with these criteria on the basis of long or short timeframes, and the legal constraints imposed on effluent pollutant concentrations are among the most essential aspects of control structures for WWTPs. This book explores all these facets in detail.

Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

Close to one-half of all Americans live in coastal counties. The resulting flood of wastewater, stormwater, and pollutants discharged into coastal waters is a major concern. This book offers a well-delineated approach to integrated coastal management beginning with wastewater and stormwater control. The committee presents an overview of current management practices and problems. The core of the volume is a detailed model for integrated coastal management, offering basic principles and methods, a direction for moving from general concerns to day-to-day activities, specific steps from goal setting through monitoring performance, and a base of scientific and technical information. Success stories from the Chesapeake and Santa Monica bays are included. The volume discusses potential barriers to integrated coastal management and how they may be overcome and suggests steps for introducing this concept into current programs and legislation. This practical volume will be important to anyone concerned about management of coastal waters: policymakers, resource and municipal managers, environmental professionals, concerned community groups, and researchers, as well as faculty and students in environmental studies.

The city of Pittsburgh and surrounding area of southwestern Pennsylvania face complex water quality problems, due in large part to aging wastewater infrastructures that cannot handle sewer overflows and stormwater runoff, especially during wet weather. Other problems such as acid mine drainage are a legacy of the region's past coal mining, heavy industry, and manufacturing economy. Currently, water planning and management in southwestern Pennsylvania is highly fragmented; federal and state governments, 11 counties, hundreds of municipalities, and other entities all play roles, but with little coordination or cooperation. The report finds that a comprehensive, watershed-based approach is needed to effectively meet water quality standards throughout the region in the most cost-effective manner. The report outlines both technical and institutional alternatives to consider in the development and implementation of such an approach.

This book presents the results of an analytical study on the economic valuation for wastewater, comparing the cost of no action versus the cost of effective wastewater management. One of the Millennium Development Goals adopted by the United Nations was to reduce by half the proportion of people without access to safe drinking water and improved sanitation by 2015. Further, at the Rio+20 Summit in June 2012, governments recognised the need to adopt measures to significantly reduce water pollution, increase water quality and significantly improve wastewater treatment which is now reflected in the Sustainable Development Goals. To achieve these objectives, substantial investment in sanitation including septage and sewage management is required, in particular in developing countries. A financial analysis of wastewater management looks at its private costs and benefits and can underpin decision making from a business or treatment plant operator standpoint. Economic analysis looks at the broader costs and benefits for society, providing information for public policy decisions to support improvements in wastewater management. Adequate wastewater collection, treatment, and safe use or disposal can lead to significant environmental and health benefits. However, because some of these benefits do not have a market price, they have not traditionally been considered in the financial analysis of wastewater treatment projects, therefore underestimating total benefits.