The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.

Double porosity soil is characterised by a soil continuum containing two distinct porosities. Typically, this consists of macro-grains (lumps) of soil that have an internal porosity defined as the intragranular porosity. The spaces between lumps are identified as intergranular voids that give rise to the intergranular porosity. Human activities such as land reclamation or mining can give rise to large areas of land with subsoil that exhibits double porosity. The need to build in, or on, these areas is increasing, due to demand for land for industrial usage, infrastructure, and residence. However, the engineering properties of such soils are challenging, and often difficult to predict due to their inhomogeneity and a lack of information about the initial or current parameters. Double porosity mining waste landfills in Northern Bohemia in the Czech Republic were studied in this project. There, decades of open-cast mining of brown coal have left vast areas of land affected by the waste overburden that has been removed and dumped in old mining pits. Redevelopment of areas affected by mining sometimes requires construction on old overburden waste spoil heaps, which consist primarily of lumps of overconsolidated clay and are therefore characterised by a double porosity soil structure. The loading response on these clayfills entails large absolute and relative deformations, which means that ground improvement is normally needed before construction begins, to ensure that both stability and service limit state requirements are met. The primary aim of this research was a comparison, through physical modelling, of ground improvement techniques on double porosity clay landfills. A secondary objective was to contribute to the understanding of the material behaviour governing response to loading and other processes on double porosity soil.

Knowledge of the performance of river dykes during flooding is necessary when designing governmental assistance plans aimed to reduce both casualties and material damage. This is especially relevant when floods have increased in their frequency during the last decades, together with the resulting material damage and life costs. Most of previous attempts for analyzing dyke breaching during flooding have neglected to consider the soil mechanics component and the influence of infiltration and saturation changes on the failure mechanisms developed in the river dyke. This research project aimed to fill that gap in knowledge by analyzing, in a comprehensive manner, the effect of transient water conditions, represented by successive flood cycles, on the seepage conditions and subsequent breaching of dykes. Therefore, three key sub-projects were carried out: • the analysis of the results from an overflow field test, • the physical modeling of small-scaled models under an enhanced gravity field, • the numerical modeling of the flow response and the resulting stability of both the air- and water-side slopes. The results from the numerical simulations matched accurately with the results obtained with the centrifuge modeling, including the prediction of local instabilities during the flood cycles for those dykes that did not include a toe filter.

This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions.Topics presented at the conference:Soil - Structure - Interaction;

This book presents the select proceedings of the International Conference on Sustainable Practices and Innovations in Civil Engineering (SPICE 2019). The chapters discuss emerging and current research in sustainability in different areas of civil engineering, which aim to provide solutions to sustainable development. The contents are broadly divided into the following six categories: (i) structural systems, (ii) environment and water resource systems, (iii) construction technologies, (iv)geotechnical systems, (v) innovative building materials, and (vi) transportation. This book will be of potential interest for students, researchers, and practitioners working in sustainable civil engineering related fields.

The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.

In recent decades the development of unsaturated soil mechanics has been remarkable, resulting in momentous advances in fundamental knowledge, testing techniques, computational procedures, prediction methodologies and geotechnical practice. The advances have spanned the full spectrum of theory and practice. In addition, unsaturated materials exhibiting complex behaviour such as residual soils, swelling soils, compacted soils, collapsing soils, tropical soils and solid wastes have been integrated in a common understanding of shared behaviour features. It is also noteworthy that unsaturated soil mechanics has proved surprisingly fruitful in expanding to other neighbouring areas such as swelling rocks, rockfill mechanics, and freezing soils. As a consequence, geotechnical engineering involving unsaturated soils can be now approached from a more rational and systematic perspective leading towards an improved and more effective practice. Unsaturated Soils contains the papers presented at the 5th International Conference on Unsaturated Soil (Barcelona, Spain, 6-8 September 2010). They report significant advances in the areas of unsaturated soil behaviour, testing techniques, constitutive and numerical modelling and applications. The areas of application include soil-atmosphere interaction, foundations, slopes, embankments, pavements, geoenviromental problems and emerging topics. They are complemented by three keynote lectures and three general reports covering general issues of modelling, testing and applications. Unsaturated Soils is a comprehensive record of the state-of-the art in unsaturated soil mechanics and a sound basis for further progress in the future. The two volumes will serve as an essential reference for academics, researchers and practitioners interested in unsaturated soils.