Field and laboratory testing programs were conducted to develop models that predict the resilient modulus of subgrade soils from the test results of DCP, CIMCPT, FWD, Dynaflect, and soil properties. The field testing program included DCP, CIMCPT, FWD, and Dynaflect testing, whereas the laboratory program included repeated load triaxial resilient modulus tests and physical properties and compaction tests. Nine overlay rehabilitation pavement projects in Louisiana were selected. A total of four soil types (A-4, A-6, A-7-5, and A-7-6) were considered at different moisture-dry unit weight levels. The results of the laboratory and field testing programs were analyzed and critically evaluated. A comprehensive statistical analysis was conducted on the collected data. The results showed a good agreement between the predicted and measured resilient modulus from the various field test methods considered. The DCP and CIMCPT models were enhanced when the soil moisture content and dry unit weight were incorporated. The results also showed that, among all back calculated FWD moduli, those back calculated using ELMOD 5.1.69 software had the best correlation with the measured Mr. Finally, the Mr values estimated using the approach currently adopted by the LADOTD were found to correlate poorly with the measured Mr values.

At head of title: National Cooperative Highway Research Program.

This volume presents selected papers presented during the 4th International Conference on Transportation Geotechnics. The papers address the geotechnical challenges in design, construction, maintenance, monitoring, and upgrading of roads, railways, airfields, and harbor facilities and other ground transportation infrastructure with the goal of providing safe, economic, environmental, reliable and sustainable infrastructures. This volume will be of interest to postgraduate students, academics, researchers, and consultants working in the field of civil and transport infrastructure.

These proceedings address the latest developments in information communication and technologies for geo-engineering. The 3rd International Conference on Information Technology in Geo-Engineering (ICITG 2019), held in Guimarães, Portugal, follows the previous successful installments of this conference series in Durham (2014) and Shanghai (2010). The respective chapters cover the following: Use of information and communications technologies Big data and databases Data mining and data science Imaging technologies Building information modelling applied to geo-structures Artificial intelligence Smart geomaterials and intelligent construction Sensors and monitoring Asset management Case studies on design, construction and maintenance Given its broad range of coverage, the book will benefit students, educators, researchers and professional practitioners alike, encouraging these readers to help take the geo-engineering community into the digital age

As with the previous two symposia, the 32 papers from the June/July, 1999, Seattle symposium present advances in the nondestructive testing of pavements using conventional falling weight deflectometer techniques and other promising techniques such as ground penetrating radar, rolling weight deflecto