This thesis describes one of the first measurements made at CERN’s Large Hadron Collider, the world's largest and highest-energy particle collider. The method of analysis described in the first part is applied to the first CMS collision data collected after the LHC startup in 2010 and leads to the first experimental result for the inclusive b cross section using semileptonic decays at a center of mass energy of 7 TeV. The second part of the thesis describes the building and testing of the barrel pixel detector; the author herself played an important role in its construction, commissioning and first exploitation. The CMS collaboration Thesis Award Committee selected this work as the best thesis of the year 2010

The work described in this PhD thesis is a study of a real implementation of a track-finder system which could provide reconstructed high transverse momentum tracks to the first-level trigger of the High Luminosity LHC upgrade of the CMS experiment. This is vital for the future success of CMS, since otherwise it will be impossible to achieve the trigger selectivity needed to contain the very high event rates. The unique and extremely challenging requirement of the system is to utilise the enormous volume of tracker data within a few microseconds to arrive at a trigger decision. The track-finder demonstrator described proved unequivocally, using existing hardware, that a real-time track-finder could be built using present-generation FPGA-based technology which would meet the latency and performance requirements of the future tracker. This means that more advanced hardware customised for the new CMS tracker should be even more capable, and will deliver very significant gains for the future physics returns from the LHC.

This book collects the Proceedings of the Workshop "Incontri di Fisica delle Alte Energie (IFAE) 2006, Pavia, 19-21 Aprile 2006". The workshop is the fifth edition of a series of workshops on fundamental research in particle physics, as carried on at the most important international laboratories, and possible fallouts in medical and technological applications. Researches in this field aim at identifying the most elementary constituents of matter.

This book mainly focuses on the study of photon + 3 jets final state in Proton-Proton Collisions at √s = 7TeV, searching for patterns of two (or more) distinct hard scatterings in the same collision, i.e the so-called Double Parton Scattering (DPS). A new method by using Monte Carlo generators was performed and provides higher order corrections to the description of the Single Parton Scattering (SPS) background. Further it is investigated whether additional contributions from DPS can improve the agreement between the measured data and the Monte Carlo predictions. The current theoretical uncertainties related to the SPS background are found to be larger than expectation. At the same time a rich set of DPS-sensitive measurements is reported for possible further interpretation.

Oliver Pooth describes the silicon strip tracker of the CMS detector and discusses methods of quality control that are new to the field of particle detector physics. These methods were established to guarantee a uniform behaviour of all detector modules which were built and tested in various places worldwide.

These two volumes present the proceedings of the International Conference on Technology and Instrumentation in Particle Physics 2017 (TIPP2017), which was held in Beijing, China from 22 to 26 May 2017. Gathering selected articles on the basis of their quality and originality, it highlights the latest developments and research trends in detectors and instrumentation for all branches of particle physics, particle astrophysics and closely related fields. This is the first volume, and focuses on the main themes Gaseous detectors, Semiconductor detectors, Experimental detector systems, Calorimeters, Particle identification, Photon detectors, Dark Matter Detectors and Neutrino Detectors. The TIPP2017 is the fourth in a series of international conferences on detectors and instrumentation, held under the auspices of the International Union of Pure and Applied Physics (IUPAP). The event brings together experts from the scientific and industrial communities to discuss their current efforts and plan for the future. The conference’s aim is to provide a stimulating atmosphere for scientists and engineers from around the world.

Too often descriptions of detectors focus on the 'what' and not the 'why'. This volume aims to elucidate how the requirements of the physics at the Large Hadron Collider (LHC) define the detector environment. In turn, the detector choices are made to adopt to that environment. The goal of LHC physics is to explore the mechanism for electroweak symmetry breaking. Because of the minuscule cross-sections which need to be explored, 0.1 fb, the LHC needs to provide 100 fb-1/yr, or an instantaneous luminosity of 1034 / (cm2 sec). With a bunch crossing interval of 25 nsec, well matched to detector speeds, there will be 25 events occupying each bunch crossing.Thus the physics requires fast, finely segmented, low noise and radiation resistant detectors which provide redundant measurements of the rarely produced electrons and muons. To achieve those goals, new ground was broken in constructing the A Toroidal LHC ApparatuS (ATLAS) and Compact Muon Solenoid (CMS) detectors in the vertex detectors, tracking systems, calorimetry, strong magnets, muon systems, front end electronics, trigger systems, and in the data acquisition methods used.