This book discusses the multiple systems that make commercial jet travel safe and convenient. The author starts by tracing the evolution of commercial jets from the Boeing 707 to the double decker Airbus A380. The next 7 chapters discuss flight controls, along with the high lift surfaces (flaps and slats) that are essential to allow high speed, low drag aircraft to take-off and land. The other systems include Engines/Nacelles, Cabin Pressurization and Air Conditioning systems, Landing Gear and brakes, Fuel Systems, Instruments/Sensors, and finally Deicing systems for the wings, nacelles and external air speed sensors. Case studies describe a significant accident that arose from a failure in the various systems described. The final chapter summarizes the past 60 years of jet travel and describe how these systems have created a cheaper, safer mode of travel than any other.

Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications offers a comprehensive paperback on the aerospace relevance of polymer/carbonaceous nanofiller-based nanocomposite. This manuscript summarizes all specific information on the design, fabrication and application areas of aerospace industry that employ polymer/carbonaceous nanofiller-based nanocomposites. In addition, it points to the potential of aeronautical nanocomposites towards lightning strike, radiation shielding, anti-corrosion, electronic/optical features, thermal management, antistatic application, self-healing aptitude, and green nanocomposites. The modeling of mechanical and essential properties of aerospace nanocomposites is also discussed, along with challenges and future forecasts of polymer/carbonaceous nanofiller nanocomposites. - Focuses on essential aerospace composites, carbonaceous nanofillers, and ensuing polymer/carbonaceous nanofiller-based nanocomposites - Explores indispensable properties of aeronautical nanocomposites, modeling of physical properties, and combined influence of carbonaceous nanofillers and carbon fibers on space material properties - Includes up-to-date technical applications of polymer/carbonaceous nanofiller-based nanocomposites in design, mechanical robustness, heat resistance, non-flammability, anti-corrosion, radiation shielding, lightning strike prevention, electronic/optical features, antistatic application, self-healing, thermal management, and green nanocomposites for aeronautical relevance

The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.

#1 NEW YORK TIMES BESTSELLER • From the author of Jurassic Park, Timeline, and Sphere comes this extraordinary thriller about airline safety, business intrigue, and a deadly cover-up. “The pacing is fast, the suspense nonstop.”—People Three passengers are dead. Fifty-six are injured. The interior cabin is virtually destroyed. But the pilot manages to land the plane. At a moment when the issue of safety and death in the skies is paramount in the public mind, a lethal midair disaster aboard a commercial twin-jet airliner flying from Hong Kong to Denver triggers a pressured and frantic investigation. Airframe is nonstop reading, full of the extraordinary mixture of super suspense and authentic information on a subject of compelling interest that are the hallmarks of Michael Crichton. “A one-sitting read that will cause a lifetime of white-knuckled nightmares.”—The Philaelphia Inquirer “The ultimate thriller . . . [Crichton’s] stories are always page-turners of the highest order. . . . [Airframe] moves like a firehouse dog chasing a red truck.”—The Denver Post “Dramatically vivid.”—The New York Times

Up-To-Date Coverage of Every Aspect of Commercial Aviation Safety Completely revised edition to fully align with current U.S. and international regulations, this hands-on resource clearly explains the principles and practices of commercial aviation safety—from accident investigations to Safety Management Systems. Commercial Aviation Safety, Sixth Edition, delivers authoritative information on today's risk management on the ground and in the air. The book offers the latest procedures, flight technologies, and accident statistics. You will learn about new and evolving challenges, such as lasers, drones (unmanned aerial vehicles), cyberattacks, aircraft icing, and software bugs. Chapter outlines, review questions, and real-world incident examples are featured throughout. Coverage includes: • ICAO, FAA, EPA, TSA, and OSHA regulations • NTSB and ICAO accident investigation processes • Recording and reporting of safety data • U.S. and international aviation accident statistics • Accident causation models • The Human Factors Analysis and Classification System (HFACS) • Crew Resource Management (CRM) and Threat and Error Management (TEM) • Aviation Safety Reporting System (ASRS) and Flight Data Monitoring (FDM) • Aircraft and air traffic control technologies and safety systems • Airport safety, including runway incursions • Aviation security, including the threats of intentional harm and terrorism • International and U.S. Aviation Safety Management Systems

Airlines of the Jet Age provides the first comprehensive history of the world's airlines from the early 1960s to the present day. It begins with an informative introductory chapter on the infancy of flight and the development of air-transport craft used during the First and Second World Wars, and then wings into the "first" Jet Age--the advent of jet airlines. It continues through the "second" Jet Age of wide-bodied aircraft, such as the Boeing 747 and DC-10, and closes with the introduction of the "third" Jet Age, which begins with the giant double-decked Airbus A380. This reference book is an unparalelled reference for aviation buffs, covering airlines around the globe and throughout the modern eras of human flight. The last book written by renowned airline historian R.E.G. Davies, Airlines of the Jet Age is the ultimate resource for information and insight on modern air transport.

This book aims to provide comprehensive coverage of the field of air transportation, giving attention to all major aspects, such as aviation regulation, economics, management and strategy. The book approaches aviation as an interrelated economic system and in so doing presents the “big picture” of aviation in the market economy. It explains the linkages between domains such as politics, society, technology, economy, ecology, regulation and how these influence each other. Examples of airports and airlines, and case studies in each chapter support the application-oriented approach. Students and researchers in business administration with a focus on the aviation industry, as well as professionals in the industry looking to refresh or broaden their knowledge of the field will benefit from this book.