Combustion, Flames and Explosions of Gases, Third Edition provides the chemist, physicist, and engineer with the scientific basis for understanding combustion phenomena.

Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.

Combustion, Flames and Explosions of Gases, Third Edition provides the chemist, physicist, and engineer with the scientific basis for understanding combustion phenomena.

Most of the material covered in this book deals with the fundamentals of chemistry and physics of key processes and fundamental mechanisms for various combustion and combustion related phenomena in gaseous combustible mixture. It provides the reader with basic knowledge of burning processes and mechanisms of reaction wave propagation. The combustion of a gas mixture (flame, explosion, detonation) is necessarily accompanied by motion of the gas. The process of combustion is therefore not only a chemical phenomenon but also one of gas dynamics. The material selection focuses on the gas phase and with premixed gas combustion. Premixed gas combustion is of practical importance in engines, modern gas turbine and explosions, where the fuel and air are essentially premixed, and combustion occurs by the propagation of a front separating unburned mixture from fully burned mixture. Since premixed combustion is the most fundamental and potential for practical applications, the emphasis in the present work is be placed on regimes of premixed combustion. This text is intended for graduate students of different specialties, including physics, chemistry, mechanical engineering, computer science, mathematics and astrophysics.

Throughout its previous four editions, Combustion has made a very complex subject both enjoyable and understandable to its student readers and a pleasure for instructors to teach. With its clearly articulated physical and chemical processes of flame combustion and smooth, logical transitions to engineering applications, this new edition continues that tradition. Greatly expanded end-of-chapter problem sets and new areas of combustion engineering applications make it even easier for students to grasp the significance of combustion to a wide range of engineering practice, from transportation to energy generation to environmental impacts. Combustion engineering is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications—including power generation in internal combustion automobile engines and gas turbine engines. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions, make this a crucial area of engineering. - New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion—all interrelated and discussed by considering scaling issues (e.g., length and time scales) - New information on sensitivity analysis of reaction mechanisms and generation and application of reduced mechanisms - Expanded coverage of turbulent reactive flows to better illustrate real-world applications - Important new sections on stabilization of diffusion flames—for the first time, the concept of triple flames will be introduced and discussed in the context of diffusion flame stabilization

Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author's life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses. - A practical, results-oriented manual for practicing engineers, bringing protection principles and chemistry together with modern risk analysis techniques - Specific focus on oil and gas and related chemical facilities, making it comprehensive and compact - Includes the latest best practice guidance, as well as lessons learned from recent incidents