This book focuses on the development of design techniques and methodologies for 60-GHz and E-band power amplifiers and transmitters at device, circuit and layout levels. The authors show the recent development of millimeter-wave design techniques, especially of power amplifiers and transmitters, and presents novel design concepts, such as “power transistor layout” and “4-way parallel-series power combiner”, that can enhance the output power and efficiency of power amplifiers in a compact silicon area. Five state-of-the-art 60-GHz and E-band designs with measured results are demonstrated to prove the effectiveness of the design concepts and hands-on methodologies presented. This book serves as a valuable reference for circuit designers to develop millimeter-wave building blocks for future 5G applications.

This book tackles the challenges of designing mm-wave circuits in 16nm FinFET, from the elementary transistor level to a measured D-band transmitter. The design of crucial building blocks such as oscillators and power amplifiers are covered through theoretical limitations, design methodology and measurement. Offers first book on design of mm-wave circuits above 100GHz in an advanced 16nm FinFET digital technology; Covers fundamentals of transistor layout, circuit implementation and measurements; Provides single-source reference to information otherwise only available in disparate literature.

Driven by advanced CMOS technology, power management units, RF transceivers, and sensors, analog and mixed-signal circuits can now be fully integrated with VLSI digital systems for applications ranging from mobile, internet-of-things (IoT), wearable, and implantable medical devices. Evidently, the circuit- and system-level innovations have pushed the device performance boundaries to become orders of magnitude higher, whilst keeping the same or even lower power consumption.Selected Topic in Power, RF, and Mixed-Signal ICs provides a practical overview and state-of-the-art advancements on several selected topics in the areas of power, RF, and mixed-signal integrated circuits and systems.Topics covered in the book include:• Very-High-Frequency DC-DC Switching Converters• Analog and Digital Low-Dropout Regulators• Analog and Digital Sub-Sampling Frequency Synthesizers• Hybrid ADC Architecture with Digital Assisted Techniques• CMOS Image Sensors and Their Biomedical Applications• CMOS Temperature Sensors• CMOS Millimeter-Wave Power Amplifiers• Zigbee/BLE Transmitter for IoT Applications

Build high-performance, energy-efficient circuits with this cutting-edge guide to designing, modeling, analysing, implementing and testing new mm-wave systems.

This book introduces power amplifier design in 22nm FDSOI CMOS dedicated towards 5G applications at 28 GHz and presents 4 state-of-the-art power amplifier designs. The authors discuss power amplifier performance metrics, design trade-offs, and presents different power amplifier classes utilizing efficiency enhancement techniques at 28 GHz. The book presents the design process from theory, simulation, layout, and finally measurement results.

This book presents design methods and considerations for digitally-assisted wideband millimeter-wave transmitters. It addresses comprehensively both RF design and digital implementation simultaneously, in order to design energy- and cost-efficient high-performance transmitters for mm-wave high-speed communications. It covers the complete design flow, from link budget assessment to the transistor-level design of different RF front-end blocks, such as mixers and power amplifiers, presenting different alternatives and discussing the existing trade-offs. The authors also analyze the effect of the imperfections of these blocks in the overall performance, while describing techniques to correct and compensate for them digitally. Well-known techniques are revisited, and some new ones are described, giving examples of their applications and proving them in real integrated circuits.