Cement and concrete are of great interest to the construction and civil engineering communities. This study provides an appreciation of the complex nature of these materials and a realization that most of the failures involving concrete constructions are preventable.

Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.

This monograph describes cement clinker formation. It covers multicomponent systems, clinker phase structures and their reactions with water, hydrate composition and structure, as well as their physical properties. The mineral additions to cement are described as are their influence on cement-paste properties. Special cements are also discussed. The microstructure of concrete is then presented, and special emphasis is given to the role of the interfacial transition zone, and the corrosion processes in the light of cement-phase composition, mineral additions and w/c ratio. The admixtures' role in modern concrete technology is described with an emphasis on superplasticizer chemistry and its cement-paste rheological modification mechanism. Cement with atypical properties, such as calcium aluminate, white, low energy and expansive cements are characterized. The last part of the book is devoted to special types of concrete such as self compacting and to reactive powders.

This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Whilst most structures made using concrete and cement-based composites have not shown signs of premature degradation, there have been notable exceptions. In addition, there is increasing pressure for new structures to remain in serviceable condition for long periods with only minimal maintenance before being recycled. All these factors have highlighted the issues of what affects the durability of these materials in different circumstances and how material properties can be measured and improved. Durability of concrete and cement composites summarises key research on these important topics.After an introductory chapter, the book reviews the pore structure and chemistry of cement-based materials, providing the foundation for understanding the particular aspects of degradation which are discussed in the following chapters. These include dimensional stability and cracking processes, chemical and microbiological degradation of concrete, corrosion of reinforcing and prestressing steels, deterioration associated with certain aggregates, effects of frost and problems involving fibre-reinforced and polymer-cement composites.With its distinguished international team of contributors, Durability of concrete and cement composites is a standard reference for all those concerned with improving the service life of structures using these materials. - Analyses a range of materials such as reinforced steel in concrete, pre-stressed concrete and cement composites - Discusses key degradation phenomena such as cracking processes and the impact of cold weather conditions - A standard reference for those concerned with improving the service life of structures using concrete and cement based composites

This book presents an introduction, a discussion of the concept of the design and the concrete’s development, and the properties and testing of the concrete in fresh and hardened stages. After an introduction to the principles of cement and concrete composites, the reader will find information on the principles of quantum-scaled cement, low-carbon cement, fiber-reinforced concrete, reactive powder concrete, and tailor-made recycled aggregate concrete.