According to the new type test requirements for interior trim parts of motor vehicle in "Implementation rules for compulsory product certification - Motor vehicles" (CNCA-C11-01:2020), China Certification Centre for Automotive Products has adjusted the scope of application of this Rules, so as to ensure the normal and orderly provision of services by manufacturers of automotive interior trim parts and the supply of complete vehicles.

Implementation Detailed-Rules for China Compulsory Certification - Safety-Belts for Motor Vehicles is formulated to ensure the standardization and effectiveness of compulsory certification.

In order to ensure the standardization and effectiveness of compulsory certification, this is formulated according to Compulsory Product Certification Implementation Rules - Interior Trim Parts for Motor Vehicle (CNCA-C11-09:2014) (hereinafter refers to as the Implementation Rules) and CNCA Compulsory Product General Implementation Rules, including Compulsory Product Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination (CNCA-00C-003), Compulsory Product Certification Implementation Rules - Utilization of Manufacturing Enterprise Test Resources and Other Certification Results (CNCA-00C-004), Compulsory Product Certification Implementation Rules - Factory Quality Assurance Capability Requirements (CNCA-00C-005), and Compulsory Product Certification Implementation Rules - Factory Inspection General Requirements (CNCA-00C-006) and quality manuals, procedure documents and operation instructions of China Certification Centre for Automotive Products (CCAP). It is used to support the Implementation Rules as a supportive document.

This Rules applies to the CCAP mark certification of controllers used for electric bicycles.

This Rules applies to automobile brake lining. Due to the changes in the law, regulations or related product standards, technology, industry policies and other causes which may change the applicable scope, the announcement released by CNCA shall be final and conclusive.

This Rules applies to the CCAP mark certification of non-metallic materials and parts of electric power assist bicycles.

This Rules is established based on the safety risk and certification risk of automobile products; stipulates the basic principles and requirements for compulsory certification of all vehicles within its scope of application. Its purpose is to ensure that certified vehicles continue to comply with laws, regulations, and standards.