This program addresses the hazards inherent in carbon monoxide generation and testing procedures. Additionally, it provides an overview of combustion analysis and the relation of building pressures to carbon monoxide generation. This training manual is broken into three sections: 1) Carbon Monoxide (CO) Explains: What CO is, how CO is produced, health effects of CO exposure, how to respond to an alarm, basic testing procedures, code compliance, and exposure standards. 2) Combustion: An in depth explanation of combustion analysis, troubleshooting, and remediation of CO production for both gas and oil fired appliances such as: boilers, furnaces, hot water heaters, clothes dryers, etc. 3) Pressure Measurements: A primer on how building pressures effect the distribution of carbon monoxide.

Public interest in the health impacts of carbon monoxide (CO) has been increasing rapidly during the past decade. And rightly so: it is the most ubiquitous environmental poison. Car exhaust fumes, furnaces, gas-powered engines, home water heaters, smoke from all types of fire, and tobacco smoke all contribute to carbon monoxide intoxication - the l

This toxicological profile is prepared in accordance with guidelines developed by the Agency for Toxic Substances and Disease Registry (ATSDR) and the Environmental Protection Agency (EPA). The original guidelines were published in the Federal Register on April 17, 1987. Each profile will be revised and republished as necessary. The ATSDR toxicological profile succinctly characterizes the toxicologic and adverse health effects information for the toxic substances each profile describes. Each peer-reviewed profile identifies and reviews the key literature that describes a substance's toxicologic properties. Other pertinent literature is also presented but is described in less detail than the key studies. The profile is not intended to be an exhaustive document; however, more comprehensive sources of specialty information are referenced. The profiles focus on health and toxicologic information; therefore, each toxicological profile begins with a public health statement that describes, in nontechnical language, a substance's relevant toxicological properties. Following the public health statement is information concerning levels of significant human exposure and, where known, significant health effects. A health effects summary describes the adequacy of information to determine a substance's health effects. ATSDR identifies data needs that are significant to protection of public health. Each profile: (A) Examines, summarizes, and interprets available toxicologic information and epidemiologic evaluations on a toxic substance to ascertain the levels of significant human exposure for the substance and the associated acute, subacute, and chronic health effects; (B) Determines whether adequate information on the health effects of each substance is available or being developed to determine levels of exposure that present a significant risk to human health of acute, subacute, and chronic health effects; and (C) Where appropriate, identifies toxicologic testing needed to identify the types or levels of exposure that may present significant risk of adverse health effects in humans.

This book is the eighth volume in the series Acute Exposure Guideline Levels for Selected Airborne Chemicals, and reviews AEGLs for acrolein, carbon monoxide, 1,2-dichloroethene, ethylenimine, fluorine, hydrazine, peracetic acid, propylenimine, and sulfur dioxide for scientific accuracy, completeness, and consistency with the NRC guideline reports.

This book presents WHO guidelines for the protection of public health from risks due to a number of chemicals commonly present in indoor air. The substances considered in this review, i.e. benzene, carbon monoxide, formaldehyde, naphthalene, nitrogen dioxide, polycyclic aromatic hydrocarbons (especially benzo[a]pyrene), radon, trichloroethylene and tetrachloroethylene, have indoor sources, are known in respect of their hazardousness to health and are often found indoors in concentrations of health concern. The guidelines are targeted at public health professionals involved in preventing health risks of environmental exposures, as well as specialists and authorities involved in the design and use of buildings, indoor materials and products. They provide a scientific basis for legally enforceable standards.

Provides the most current information and research available for performing risk assessments on exposed individuals and populations, giving guidance to public health authorities, primary care physicians, and industrial managers Reviews current knowledge on human exposure to selected chemical agents and physical factors in the ambient environment Updates and revises the previous edition, in light of current scientific literature and its significance to public health concerns Includes new chapters on: airline cabin exposures, arsenic, endocrine disruptors, and nanoparticles