Environmental remediation technologies to control or prevent pollution from hazardous waste material is a growing research area in academia and industry, and is a matter of utmost concern to public health, to improve ecology and to facilitate the redevelopment of a contaminated site. Recently, in situ and ex situ remediation technologies have been developed to rectify the contaminated sites, utilizing various tools and devices through physical, chemical, biological, electrical, and thermal processes to restrain, remove, extract, and immobilize mechanisms to minimize the contamination effects. This handbook brings altogether classical and emerging techniques for hazardous wastes, municipal solid wastes and contaminated water sites, combining chemical, biological and engineering control methods to provide a one-stop reference. This handbook presents a comprehensive and thorough description of several remediation techniques for contaminated sites resulting from both natural processes and anthropogenic activities. Providing critical insights into a range of treatments from chemical oxidation, thermal treatment, air sparging, electrokinetic remediation, stabilization/solidification, permeable reactive barriers, thermal desorption and incineration, phytoremediation, biostimulation and bioaugmentation, bioventing and biosparging through ultrasound-assisted remediation methods, electrochemical remediation methods, and nanoremediation, this handbook provides the reader an inclusive and detailed overview and then discusses future research directions. Closing chapters on green sustainable remediation, economics, health and safety issues, and environmental regulations around site remediation will make this a must-have handbook for those working in the field.

"This second edition of Remediation Engineering will continue to be the seminal handbook that regulators must have on-hand to address any of the remediation issues they are grappling with daily. The book is wide-ranging, but specific enough to address any environmental remediation challenge." —Patricia Reyes, Interstate Technology Regulatory Council, Washington, DC, USA "This book offers the researcher, teacher, practitioner, student, and regulator with state-of-the-art advances in conducting site investigations and remediation for common and emerging contaminants. It is revolutionary in its approach to conducting subsurface investigation, which greatly influences a successful and appropriate response in assessing and addressing environmental risk. This book is a giant leap forward in understanding how contaminates behave and how to reduce risk to acceptable levels in the natural world." —Daniel T. Rogers, Amsted Industries Incorporated, Chicago, Illinois, USA "This text is a superb reference and a good tool for learning about state-of-the-art techniques in remediation of soil and groundwater. [It] will become a ready reference at many companies as the engineering community creates increased value from remediation efforts around the world." —John Waites, AVX Corporation, Fountain Inn, South Carolina, USA Remediation Engineering was first published in 1996 and quickly became the go-to reference for a relatively young industry, offering the first comprehensive look at the state-of-the-science in treatment technologies of the time and the contaminants they applied to. This fully updated Second Edition will capture the fundamental advancements that have taken place during the last two decades within all the subdisciplines that form the foundation of the remediation engineering platform. It covers the entire spectrum of current technologies that are employed in the industry and also discusses future trends and how practitioners should anticipate and adapt to those needs. Features: Shares the latest paradigms in remediation design approach and contaminant hydrogeology Presents the landscape of new and emerging contaminants Details the current state of the practice for both conventional technologies, such as sparging and venting Examines newer technologies such as dynamic groundwater recirculation and injection-based remedies to address both organic and inorganic contaminants. Describes the advances in site characterization concepts such as smart investigations and digital conceptual site models. Includes all-new color photographs and figures.

This book details the state-of-the art in early warning monitoring of anthropogenic pollution of soil and water. It is unique with regard to its complex, multidisciplinary, mechanistic approach. Top scientists establish links and strengthen weak connections between specific fields in biology, microbiology, chemistry, biochemistry, toxicology, sensoristics, soil science and hydrogeology.

Water resources, upon which the well-being of future generations depends, are under extreme pressure today all over the world. Resulting problems have given rise to many issues including water quality, quantity, management and planning, and reflect the growing concern and importance accorded to their sustainable management. The Fifth International Conference on Water Resources Management presents the more recent technological and scientific developments associated with the management of surface and sub-surface water resources. The papers are grouped under the following topics: Water Management and Planning; Waste Water Treatment and Re-use; Water Quality; Pollution Control; Management and Economics; Decision Support Systems; Hydraulic Systems; Flood Risk; Hydraulic Modelling; Irrigation Problems; Governance and Monitoring.

"The papers were presented at the eighth International Conference on Advances in Fluid Mechanics held in Portugal in 2010."--Pref.