The present book provides a comprehensive survey on the governing phenomena of cable vibration, both associated with direct action of wind and rain: buffeting, vortex-shedding, wake effects, rain-wind vibration; and resulting from the indirect excitation through anchorage oscillation: external and parametric excitation. Methodologies for assessment of the effects of those phenomena are presented and illustrated by practical examples. Control of cable vibrations is then discussed and state-of-art results on the design of passive control devices are presented.

Research Paper (postgraduate) from the year 2014 in the subject Engineering - Civil Engineering, grade: unknown, University of Weimar, language: English, abstract: The vibration characteristic of a cable stayed bridges structure is the main axis of the study in this paper, many structural parameters are used to simulate and determine the effect of vibration on the structural performance by identifying the natural frequencies of the system and the mode shapes that can occur in the real structure. Modeling the stay cables with three famous styles of arrangements such as Harp, Semi Harp and Fan styles, and assigning roller, hinged and fixed boundary conditions on the deck support of the cable stayed bridge, in addition to using two design cases of the girders and pylons dimensions in the global structure for that purpose. Through the use of ABAQUS finite element analysis, the models were generated for each mentioned cases and the results of the frequency linear perturbation step of 10 mode shapes were determined through the simulation of the deformed shapes and the determined values of the natural frequencies of each mode for each case of interest. It was seen that the roller boundary condition was much prone to the early vibration and the stay cables of the direction near to the roller support were vibrated and stressed much more than the other direction compared with the hinged and fixed boundary conditions, and the mode shapes 7, 8, 9 and 10 were the most vibrated cases for all the boundary conditions without any distinction. The week design of the girders and the pylons has the great effect on the vibration of the stay cables, pylons and deck of the structure especially near the roller support direction due to the early vibration of the case of roller support, so the use of cross ties and damping between the stay cables and the girders are very important in the cases of significant vibrations which affect the performance of the cable stayed bridges.

This research is aimed at investigating and analyzing the rain-wind-induced cable vibration phenomena experienced in cables of cable-stayed bridges and also the countermeasures employed by engineers to mitigate the large-amplitude vibration problem reported by various researchers around the world. In order to investigate the problem of the water rivulet creation at the top of the cable surface, a single-degree-of-freedom (SDOF) analytical model was developed and analyzed. This thesis studies the aerodynamic instability of cables in cable-stayed bridges by doing literature review of a typical in-situ test, developing a single degree-of-freedom (SDOF) analytical model, and an ANSYS finite element model. Furthermore, a linear viscous damper that acts as a countermeasure to the large amplitudes of vibration is reported and analyzed. The suppression characteristics and damper effectiveness of such countermeasure are summarized.

TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 353: Inspection and Maintenance of Bridge Stay Cable Systems identifies and explains various inspection and maintenance techniques for bridge stay cable systems. It discusses both short- and long-term approaches. The report information on methods for inspections and assessments, including nondestructive testing and evaluation procedures; repair and retrofit; methods for control of cable vibrations, including rainwind vibrations; stay cable fatigue and failure; effectiveness of various inspection and repair methods; limitations of available technologies; and trends and recommendations for future study.

This study was conducted in order to develop a set of consistent design guidelines for mitigation of excess cable vibration on cable-stay bridges. In order to accomplish this objective the Project Team started with a thorough review of existing literature to determine the state of knowledge and identify any gaps that must be filled in order to enable the formation of a consistent set of design recommendations. This review indicated that while the rain/wind problem is known in sufficient detail, galloping of dry inclined cables was the most critical wind-induced vibration mechanism in need of further experimental research. A series of wind-tunnel tests was performed to study this mechanism. Analytical and experimental research was performed to study mitigation methods, covering a range of linear and nonlinear dampers and cross-ties. The study also included brief studies on live load induced vibration and establishing driver/pedestrian comfort criteria. Based on the above, design guidelines for mitigation of wind-induced vibrations of stay cables were developed.

Fourteen years on from its last edition, Cable Supported Bridges: Concept and Design, Third Edition, has been significantly updated with new material and brand new imagery throughout. Since the appearance of the second edition, the focus on the dynamic response of cable supported bridges has increased, and this development is recognised with two new chapters, covering bridge aerodynamics and other dynamic topics such as pedestrian-induced vibrations and bridge monitoring. This book concentrates on the synthesis of cable supported bridges, suspension as well as cable stayed, covering both design and construction aspects. The emphasis is on the conceptual design phase where the main features of the bridge will be determined. Based on comparative analyses with relatively simple mathematical expressions, the different structural forms are quantified and preliminary optimization demonstrated. This provides a first estimate on dimensions of the main load carrying elements to give in an initial input for mathematical computer models used in the detailed design phase. Key features: Describes evolution and trends within the design and construction of cable supported bridges Describes the response of structures to dynamic actions that have attracted growing attention in recent years Highlights features of the different structural components and their interaction in the entire structural system Presents simple mathematical expressions to give a first estimate on dimensions of the load carrying elements to be used in an initial computer input This comprehensive coverage of the design and construction of cable supported bridges provides an invaluable, tried and tested resource for academics and engineers.