Build a roadworthy two-seater open sports car for a fraction of the cost of a kit car! Using standard tools, basic skills and low-cost materials, this volume shows you how to make the chassis, suspension and bodywork, and advises you on how to modify and use inexpensive but serviceable mechanical components. Contains sections on improving handling, information on how to get through the Single Vehicle Approval test, and builders' own stories.

Race Cars is a picture book that serves as a springboard for parents and educators to discuss race, privilege, and oppression with their kids.

If you are aspiring to build a racing car, How to Build Motorcycle-engined Racing Cars could be the book that you’ve been waiting for! Tony Pashley revisits the path that he took in the Pashley Project articles in Race Tech magazine during the design and construction of two successful hillclimb cars, but this time in great detail, with a view to enabling the reader to carry out a similar exercise for themselves. Although hillclimb and sprint cars are the focal topic, a lot of the book is applicable to race cars in general. The cars under discussion in the book are powered by motorcycle engines, which are meeting with great success in the smaller racing car classes. The total process of building a car is described, beginning with the selection and procurement of the engine. Chassis and suspension design is covered in a simplistic but adequate manner as the author’s aim is to minimize the inclusion of involved calculations. Two recipes for chassis construction are illustrated in detail, along with guidance on the processes of construction and a description of the required equipment. Following on from this, the fabrication of the suspension is explained. Further chapters are dedicated to the remaining aspects of the vehicle, covering transmission, brakes, fuel and coolant systems, and electrics. The book is heavily illustrated with 200 photographs and extensive explanatory diagrams and tables. It is a vital addition to any would-be kit car builder's library.

After building his first race cars out of southern Louisiana junkyards, Bob Riley quickly established himself as a leading light, if not genius, when it came to race car design. His first major suspension design helped Henry Ford II make good on his vendetta to beat Enzo Ferrari at Le Mans. Riley's first radical Indy car designs with its ingenious center hub mounted suspension resulted in A.J. Foyt's landmark fourth victory at the Indianapolis 500 in 1977. Since then, Riley has continued to be at the heart of the world of motorsports, working with its most famous drivers at the biggest events, including the Daytona 500, where his engineering helped Dale Earnhardt finally win NASCAR's marquee event. Americans love the "genius" angle like everyone else. They love winners. Sports stars are overtaking Hollywood these days in popularity. Racing readers are a small but predictable group and suspect the generation familiar with Bob's exploits at Indy would be keen on a book like this. They're the same age group pumping up the vintage magazine market and the collectible car market.

In most forms of racing, cornering speed is the key to winning. On the street, precise and predictable handling is the key to high performance driving. However, the art and science of engineering a chassis can be difficult to comprehend, let alone apply. Chassis Engineering explains the complex principles of suspension geometry and chassis design in terms the novice can easily understand and apply to any project. Hundreds of photos and illustrations illustrate what it takes to design, build, and tune the ultimate chassis for maximum cornering power on and off the track.

The first book to summarize the secrets of the rapidly developing field of high-speed vehicle design. From F1 to Indy Car, Drag and Sedan racing, this book provides clear explanations for engineers who want to improve their design skills and enthusiasts who simply want to understand how their favorite race cars go fast. Explains how aerodynamics win races, why downforce is more important than streamlining and drag reduction, designing wings and venturis, plus wind tunnel designs and more.

Originally published in 1949 by Floyd Clymer, this edition was republished in 2010 by VelocePress. This comprehensive and informative book, written in easy to understand language, puts the capability of designing and building a 1950's era midget racing car or a three-quarter (dirt track) car within reach of the home-based enthusiast. The fundamental principles described in this book may also be applied to the construction of a 50's track roadster or even a custom built hot rod. Highly technical terminology and engineering terms have been avoided, as the aim of this book is to define the construction process in clear and understandable terms, regardless of the reader's technical background or training. The principles it contains are just as relevant today as they were some 50 years ago when this book was first written. The design process is clearly explained, the raw materials required are described, and the construction process is presented in an easy-to-follow step by step procedure. Obviously, this book would also be a valuable reference for anyone contemplating repairing, refurbishing or restoring a vintage racing car. This edition also includes a 38 page bonus section featuring a reproduction of an appropriate Offenhauser Speed Equipment catalog. Out-of-print and unavailable for many years, this book is becoming increasingly more difficult to find on the secondary market and we are pleased to be able to offer this reproduction as a service to all those vintage automotive race car builders and enthusiasts worldwide.