Bring your old Buick engine back to life with this new, all-color Workbench-edition book. Buick has an interesting history with its 8-cylinder engines. In 1931, it began with the straight-8 engine, using overhead valve (OHV) technology while most of the other manufacturers were using 4- or 6-cylinder valve-in-block designs. When all of the GM divisions were converting to V-8 OHV postwar designs, Buick joined the party in 1953 with a design that was dubbed the “Nailhead.” This design lasted a little too long, and Buick finally replaced it in 1967 with a more modern design. The new design lasted until the mid-1970s, when emissions compliance spelled the end for big-blocks, and in 1980 for the 350. In Buick V-8 Engines 1967-1980: How to Rebuild, veteran author Mike Forsythe takes you through the complete process of rebuilding and restoring a Buick V-8 to factory condition. Covered in a thorough step-by-step format are the tools required, the disassembly process, analysis of what went wrong, parts selection and replacement, the machining process, preassembly, final assembly, and the break-in process. For those who are looking for a little more performance, a chapter about performance modifications is also included. While many people want to do this work themselves, some just want to learn how it is done. Either way, if you are in the restoration process or simply want a return to factory-original performance in your Regal, Century, Electra, Riviera, or LeSabre, this book is an essential tool to bring your Buick back to its original glory.

The photos in this edition are black and white. Skylarks, GSXs, Grand Nationals, Rivieras, Gran Sports; the list of formidable performance Buicks is impressive. From the torque monsters of the 1960s to the high-flying Turbo models of the '80s, Buicks have a unique place in performance history. During the 1960s, when word of the mountains of torque supplied by the big-inch Buicks hit the street, nobody wanted to mess with them. Later, big-inch Buicks and the Hemi Chryslers went at it hammer and tongs in stock drag shootouts and in the pages of the popular musclecar magazines of the day. The wars between the Turbo Buicks and Mustang GTs in the 1980s were also legendary, as both cars responded so well to modifications. How to Build Max-Performance Buick Engines is the first performance engine book ever published on the Buick family of engines. This book covers everything from the Nailheads of the '50s and early '60s, to the later evolutions of the Buick V-8 through the '60s and '70s, through to the turbo V-6 models of the '70s and '80s. Veteran magazine writer and Buick owner Jefferson Bryant supplies the most up-to-date information on heads, blocks, cams, rotating assemblies, interchangeability, and oiling-system improvements and modifications, along with details on the best performance options available, avenues for aftermarket support, and so much more. Finally, the Buick camp gets the information they have been waiting for, and it's all right here in How to Build Max-Performance Buick Engines.

Following Ford and Chevrolet, Pontiac entered the pony car market in 1967 and came up with one of the best and most successful muscle cars ever produced. Though based on the Camaro chassis, the Firebird offered unique features and high performance, and over its nearly 40 years of production it continued to wow drivers--as it does today. This book details the Firebird’s long and illustrious career. With high-quality, detailed color photographs of some of the finer models--both originals and faithful restorations--the book is at once a unique history and a restoration guide to all four generations of the Firebird. Pictures and text profile the correct parts, finishes, options, and trim pieces for various models. The book also covers the vehicle’s wide variety of engine options, along with all special editions and model variations from the Firebird’s introduction in 1967 to the final model in 2002.

Bring that old Oldsmobile engine back to life with this new, all-color Workbench-edition book. Oldsmobile caught the performance world by surprise when it launched its new overhead valve (OHV) V-8 in 1949 called the Rocket. These engines, along with Cadillac, were the first post-war OHV design produced by General Motors. In a world of flathead V-8 performance, they were a major step forward and an instant hit. As was the norm for all American car manufacturers in the 1950s and 1960s, the Rocket V-8s grew in size and performance capability until the Generation II engines began production in 1964. Offered in a variety of displacements over the 27-year run, the Generation II engine was offered in sizes ranging from 260 to 455 ci, suiting every possible need from reliable fuel economy to all-out performance. In Oldsmobile V-8 Engines 1964–1990: How to Rebuild, veteran author Mike Forsythe takes you through the complete process of rebuilding and restoring your Generation II Rocket V-8 to its original glory. Covered in a thorough step-by-step format are the tools required, the disassembly process, analysis of what went wrong, parts selection and replacement, the machining process, pre-assembly, final assembly, and the break-in process. Some performance upgrade options are also included. The Oldsmobile Generation II engine had a lengthy and productive run not only powering Oldsmobiles but also a variety of Buicks and Pontiacs. If you are in the restoration process or simply want a return to factory-original performance in your Cutlass, Delta 88, Vista Cruiser, Toronado, 98, or 442, this book is an essential tool in bring your Oldsmobile back to its original glory.

A brand new title in the best-selling SpeedPro!" series.Covers 3.5, 3.9, 4.0 & 4.6 litre engines from 1967 to date.Maximum road or track performance & reliability for minimum money.The author is an engineer with much professional experience of building race engines.Suitable for the enthusiast as well as the more experienced mechanic.All the information is based on practical experience.

Learn how to rebuild and upgrade your Buick Nailhead with the first book ever dedicated to the subject! In this all-new book from Nailhead racer and veteran engine builder Gary Weldon, you will learn everything you need to know about how to rebuild and upgrade the venerable Buick Nailhead engine. Weldon takes you through each step, including a review of the birth of the Nailhead, the benefits of its unique design, serial and casting number information to source and identify the best project, and a history of the engine in development. Also covered are the processes of rebuilding, including disassembly, inspection, sourcing the best parts, making critical upgrades, reassembly, and break-in. Of course, all the machine shop work is covered, and practical advice on building engines for competition is provided. The Nailhead was a throwback to the early overhead-valve engine design, and that unique design makes it a popular choice for period-correct hot rod projects. In addition, if your torquey Nailhead resides between the fenders of a Buick Special, LeSabre, Invicta, Roadmaster, Riviera, Century, Skylark, Wildcat, or Electra 225, this book will help you keep that old beauty on the road.