"Current welding literature" included in each volume.

"This volume is a selection of the papers presented during the international conference Patagonia: Myths and Realities organised through the Centre of Latin American Cultural Studies at the University of Manchester and held in September 2005 at the Manchester Museum"--Introd.

Bridge design and construction technologies have experienced remarkable developments in recent decades, and numerous long-span bridges have been built or are under construction all over the world. Cable-supported bridges, including cable-stayed bridges and suspension bridges, are the main type of these long-span bridges, and are widely used in highways crossing gorges, rivers, and gulfs, due to their superior structural mechanical properties and beautiful appearance. However, cable-supported bridges suffer from harsh environmental effects and complex loading conditions, such as heavier traffic loads, strong winds, corrosion effects, and other natural disasters. Therefore, the lifetime safety evaluation of these long-span bridges considering the rigorous service environments is an essential task. Features: Presents a comprehensive explanation of system reliability evaluation for all aspects of cable-supported bridges. Includes a comprehensive presentation of the application of system reliability theory in bridge design, safety control, and operational management. Addresses fatigue reliability, dynamic reliability and seismic reliability assessment of bridges. Presents a complete investigation and case study in each chapter, allowing readers to understand the applicability for real-world scenarios. Reliability and Safety of Cable-Supported Bridges provides a comprehensive application and guidelines for system reliability techniques in cable-supported bridges. Serving as a practical educational resource for both undergraduate and graduate level students, practicing engineers, and researchers, it also intends to provide an intuitive appreciation for probability theory, statistical methods, and reliability analysis methods.

Significant advancements in the experimental analysis of soils and shales have been achieved during the last few decades. Outstanding progress in the field has led to the theoretical development of geomechanical theories and important engineering applications. This book provides the reader with an overview of recent advances in a variety of advanced experimental techniques and results for the analysis of the behaviour of geomaterials under multiphysical testing conditions. Modern trends in experimental geomechanics for soils and shales are discussed, including testing materials in variably saturated conditions, non-isothermal experiments, micro-scale investigations and image analysis techniques. Six theme papers from leading researchers in experimental geomechanics are also included. This book is intended for postgraduate students, researchers and practitioners in fields where multiphysical testing of soils and shales plays a fundamental role, such as unsaturated soil and rock mechanics, petroleum engineering, nuclear waste storage engineering, unconventional energy resources and CO2 geological sequestration.

In the small world of micrometer to nanometer scale many natural and industrial processes include attachment of colloid particles (solid spheres, liquid droplets, gas bubbles or protein macromolecules) to fluid interfaces and their confinement in liquid films. This may lead to the appearance of lateral interactions between particles at interfaces, or between inclusions in phospholipid membranes, followed eventually by the formation of two-dimensional ordered arrays. The book is devoted to the description of such processes, their consecutive stages, and to the investigation of the underlying physico-chemical mechanisms. The first six chapters give a concise but informative introduction to the basic knowledge in surface and colloid science, which includes both traditional concepts and some recent results. Chapters 1 and 2 are devoted to the basic theory of capillarity, kinetics of surfactant adsorption, shapes of axisymmetric fluid interfaces, contact angles and line tension. Chapters 3 and 4 present a generalization of the theory of capillarity to the case, in which the variation of the interfacial (membrane) curvature contributes to the total energy of the system. The generalized Laplace equation is applied to determine the configurations of free and adherent biological cells. Chapters 5 and 6 are focused on the role of thin liquid films and hydrodynamic factors in the attachment of solid and fluid particles to an interface. Surface forces of various physical nature are presented and their relative importance is discussed. Hydrodynamic interactions of a colloidal particle with an interface (or another particle) are also considered.Chapters 7 to 10 are devoted to the theoretical foundation of various kinds of capillary forces. When two particles are attached to the same interface (membrane), capillary interactions, mediated by the interface or membrane, appear between them. Two major kinds of capillary interactions are described: (i) capillary immersion force related to the surface wettability (Chapter 7), (ii) capillary flotation force originating from interfacial deformations due to particle weight (Chapter 8). Special attention is paid to the theory of capillary immersion forces between particles entrapped in spherical liquid films (Chapter 9). A generalization of the theory of immersion forces allows one to describe membrane-mediated interactions between protein inclusions into a lipid bilayer (Chapter 10).Chapter 11 is devoted to the theory of the capillary bridges and the capillary-bridge forces, whose importance has been recognized in phenomena like consolidation of granules and soils, wetting of powders, capillary condensation, long-range hydrophobic attraction, etc. The nucleation of capillary bridges is also examined.Chapter 12 considers solid particles, which have an irregular wetting perimeter upon attachment to a fluid interface. The undulated contact line induces interfacial deformations, which engender a special lateral capillary force between the particles. The latter contributes to the dilatational and shear elastic moduli of particulate adsorption monolayers.Chapter 13 describes how lateral capillary forces, facilitated by convective flows and some specific and non-specific interactions, can lead to the aggregation and ordering of various particles at fluid interfaces or in thin liquid films. Recent results on fabricating two-dimensional (2D) arrays from micrometer and sub-micrometer latex particles, as well as 2D crystals from proteins and protein complexes, are reviewed. Chapter 14 presents applied aspects of the particle-surface interaction in antifoaming and defoaming. The mechanisms of antifoaming action involve as a necessary step the entering of an antifoam particle at the air-water interface. The considered mechanisms indicate the factors for control of foaminess.