This is a collection of methods of practical design, calculation and numerical examples that illustrate how organized, analytical reasoning can lead to the discovery of clear, direct solutions to pollution especially in the areas of biosolids management, treatment, disposal and beneficial use. The book contains an extensive collection of detailed design examples and case histories, and a distinguished panel of authors provides insight into a range of topics.

Expert help for designing and managing a biosolids program So notoriously complex and occasionally controversial that it has paradoxically reduced biosolids applications in some locales, CFR Part 503 becomes understandable, manageable, and doable with this expert guide from experienced environmental engineer Michael J. McFarland, diplomate of the American Academy of Environmental Engineers and certified Grade IV wastewater and water treatment operator. If you have interest in or responsibility for fulfilling the intent of Part 503, putting biosolids and organic residues to beneficial use and decreasing the burden on landfills, Biosolids Engineering can help you: *Control the factors in wastewater and biosolids processing that affect usability *Apply soil chemistry and physics to finding safe and appropriate uses for biosolids *Design needed hydraulic, storage, and transport systems *Ensure pathogen and vector attraction reduction *Make biosolids engineering a team effort with agricultural specialists, mining engineers, water treatment officials, and highway, transportation, and timber specialists *Apply sampling and analysis protocols for effectiveness and safety *Increase public awareness of the safety and value of biosolids applications

Intended for advanced students and practitioners of wastewater engineering, this text explains the theory and quantitative rationale for treating wastewater and industrial sludges, with public safety and efficiency in mind. It offers important information on various practices for safe and legal sludge disposal.

This proceedings contains 89 papers from 25 countries and regions, including 14 keynote lectures and 17 invited lectures, presented at the Third International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilitation (3ICGEDMAR 2011) together with the Fifth International Conference on Geotechnical & Highway Engineering (5ICGHE), which was held in Semarang, Indonesia, from 18 to 20 May 2011. This is the third conference in the GEDMAR conference series. The first was held in Singapore from 12 to 13 December 2005 and the second in Nanjing, China, from 30 May to 2 June 2008. The proceedings is divided into three sections: keynote papers, invited papers and conference papers under which there are six sub-sections: Case Studies on Recent Disasters; Soil Behaviours and Mechanisms for Hazard Analysis; Disaster Mitigation and Rehabilitation Techniques; Risk Analysis and Geohazard Assessment; Innovation Foundations for Rail, Highway, and Embankments; and Slope Failures and Remedial Measures. The conference is held under the auspices of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) Technical Committee TC-303: Coastal and River Disaster Mitigation and Rehabilitation, TC-203: Earthquake Geotechnical Engineering and Associated Problems, TC-302: Forensic Geotechnical Engineering, TC-304: Engineering Practice of Risk Assessment and Management, TC-213: Geotechnics of Soil Erosion, TC-202: Transportation Geotechnics, TC-211: Ground Improvement, Southeast Asian Geotechnical Society (SEAGS), Association of Geotechnical Societies in Southeast Asia (AGSSEA), and Road Engineering Association of Asia & Australasia (REAAA).

The past thirty years have seen the emergence of a growing desire worldwide that positive actions be taken to restore and protect the environment from the degrading effects of all forms of pollution—air, water, soil, and noise. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for ”zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers formulate answers to the above three questions. The traditional approach of applying tried-and-true solutions to specific pollution problems has been a major contributing factor to the success of en- ronmental engineering, and has accounted in large measure for the establi- ment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

The aim of Biosolids Treatment Processes, is to cover entire environmental fields. These include air and noise pollution control, solid waste processing and resource recovery, physicochemical treatment processes, biological treatment processes, biosolids management, water resources, natural control processes, radioactive waste disposal and thermal pollution control. It also aims to employ a multimedia approach to environmental pollution control.

A comprehensive guide to sludge management, reuse, and disposal When wastewater is treated, reducing organic material to carbon dioxide, water, and bacterial cells the cells are disposed of, producing a semisolid and nutrient-rich byproduct called sludge. The expansion in global population and industrial activity has turned the production of excess sludge into an international environmental challenge, with the ultimate disposal of excess sludge now one of the most expensive problems faced by wastewater facilities. Written by two leading environmental engineers, Biological Sludge Minimization and Biomaterials/Bioenergy Recovery Technologies offers a comprehensive look at cutting-edge techniques for reducing sludge production, converting sludge into a value-added material, recovering useful resources from sludge, and sludge incineration. Reflecting the impact of new stringent environmental legislation, this book offers a frank appraisal of how sludge can be realistically managed, covering key concerns and the latest tools: Fundamentals of biological processes for wastewater treatment, wastewater microbiology, and microbial metabolism, essential to understanding how sludge is produced Prediction of primary sludge and waste-activated sludge production, among the chief design and operational challenges of a wastewater treatment plant Technologies for sludge reduction, with a focus on reducing microbial growth yield as well as enhancing sludge disintegration The use of anerobic digestion of sewage sludge for biogas recovery, in terms of process fundamentals, design, and operation The use of the microbial fuel cell (MFC) system for the sustainable treatment of organic wastes and electrical energy recovery